Panasonic DMC-LX1GN operating instructions Taking Pictures using Auto Bracket

Recording pictures (basic)

Taking Pictures using Auto Bracket

In this mode, 3 pictures are automatically recorded by each press of the shutter button according to the compensation range of the exposure.

You can select the desired exposure among the 3 types of pictures.

1 Press e several times until [BAUTO BRACKET] appears and then set the compensation range of the exposure.

AUTO BRACKET

SELECT EXIT

•You can select the exposure from –1 EV to +1 EV in steps of 1/3 EV.

•When you do not use auto bracket, select [OFF].

•When setting the auto bracket, the auto bracket icon appears on the lower left of the screen.

•You cannot use auto bracket when there are only one or two pictures remaining.

•When taking pictures using auto bracket after the exposure compensation, the pictures are based on the compensated exposure.

When the exposure is compensated, the compensated exposure value appears on the screen.

•When the flash is activated, you can take only 1 picture.

•When setting auto bracket, you cannot use the audio recording function.

•When setting auto bracket and the burst mode simultaneously, auto bracket will be performed.

•The exposure may not be compensated with auto bracket depending on the brightness of the subject.

•Auto review works if you activate auto bracket, irrespective of the auto review setting. (But the picture is not enlarged.) You cannot change the auto review setting in the setup menu.

•Setting ISO sensitivity to [ISO400] increases the period between pictures to allow for the noise reduction process.

•You cannot use auto bracket if you have set quality to [TIFF] or [RAW].

•You cannot use auto bracket with [STARRY SKY] in scene mode.

•When using Shutter-priority AE [N] or Manual exposure [O] mode and you have set the shutter speed to more than 1.3 second, auto bracket does not work.

45

VQT0S46