Preparation
Attaching the Lens Cap/Strap
nLens Cap
1 Pass the string through the hole on the lens cap.
2 Pass the string through the hole on the camera.
nStrap
1 Pass the strap through the hole at the Strap Eyelet.
•Check that the strap is firmly attached to the camera.
3 Attach the lens cap.
•When you turn the camera off, carry the camera or play back the pictures, attach the lens cap to protect the surface of the lens.
•Detach the lens cap before turning on the camera in the recording mode.
•When the mode dial is set to one of the recording modes and the camera is turned on with the lens cap attached, the message [REMOVE LENS CAP AND PRESS q BUTTON] appears. After removing the lens cap, press the q cursor button.
•Be careful not to lose the lens cap.
20
VQT0S46