Recording pictures (advanced)
For setting, see page 69.
Continuous AF [CONT.AF]
SCN1 SCN2
This mode allows you to compose a picture more easily by always focusing on the subject.
When the AF mode is set to
•When it is set to [ON], the [ ] indication appears.
•The battery may be consumed faster than usual.
•It may take time to focus on the subject after rotating the zoom lever from Wide to Tele or suddenly changing the subject from a distant one to a nearby one.
•Press the shutter button halfway again when it is difficult to focus on the subject.
•You cannot use this with the scene modes (P60) [STARRY SKY], [FIREWORKS], [NIGHT PORTRAIT], or [NIGHT SCENERY].
•If the focus switch is set to [AFw], the time to focus will not be shorter.
For setting, see page 69.
NAF Assist Lamp
[AF ASSIST LAMP]
SCN1 SCN2
Illuminating the subject with the AF assist | |||
lamp allows the camera to focus on the | |||
subject in low light conditions. |
| ||
When you press the | 1 | ||
shutter button halfway in | |||
| |||
dark places or other |
| ||
situations, an AF area |
| ||
wider than usual appears |
| ||
and the AF assist lamp 1 |
| ||
turns on. |
| ||
ON | The AF assist lamp turns on under | ||
| low light conditions. In this time, | ||
| the AF assist lamp icon [S] | ||
| appears on the screen. The | ||
| effective range of the AF assist | ||
| lamp is 1.5 m. |
| |
OFF | The AF assist lamp does not turn | ||
| on. |
|
•Be sure of the following points when the AF assist lamp is in use.
•AF assist lamp is fixed to [ON] in Auto mode [0].
•You cannot use the AF assist lamp in [SCENERY], [NIGHT SCENERY], [FIREWORKS] and [SELF PORTRAIT] in scene mode. (P60)
•When you do not want to use the AF assist lamp (e.g. when you take a picture of a subject in a dark place), set the [AF ASSIST LAMP] to [OFF]. In this case, it becomes difficult to focus on the subject.
•The AF area (P75) is set only to a point on the centre of the screen when the AF assist lamp is turned on.
76
VQT0S46