Completing the Installation
Figure 3-18 Matrix DFE Startup Screen Example (N7 Chassis)
login: admin Password:
M A T R I X N7
Command Line Interface
Enterasys Networks, Inc.
50 Minuteman Rd.
Andover, MA
Phone: +1 978 684 1000
WWW:http://www.enterasys.com
(c) Copyright Enterasys Networks, Inc. 2003
Chassis Serial Number: xxxxxxxxxxxx
Chassis Firmware Revision: xx.xx.xx
Matrix
Completing the Installation of a
In an established DFE module system,
•a DFE module is already established as the management module,
•the passwords have already been set for various users,
•the system IP address is set, and
•other system parameters have been set.
When you install a new DFE module into a system with an existing configured user account, the current system settings in that account are already recognized by the new DFE module and it will operate accordingly.
If you need to change any settings, you can connect a terminal to the local console port as described in “Connecting to COM Port for Local Management” on page 3‐23 to access system management, or use a Telnet connection to access the DFE module system management as described in Chapter 3 of the Matrix DFE‐Gold Series Configuration Guide.
Matrix