Wall Control Installation
Figure 12
Controller
Figure 13
Outer Housing
Locking Screw Option (Figure 14)
To prevent tampering, damage, and theft, it is suggested to install the locking screws. Once installed, the locking screws will prevent the Controller from being released from the Outer Housing without being removed first from the device box in the wall.
!NOTE: A Philips head screwdriver will be required for this step.
Figure 14 | Locking |
| screws |
Outer 
Housing
8.Using the wiring diagram in Figure 15 as a guide, make the appropriate wire connections.
11