Operation
1. Room Temperature
Displays current ambient temperature in the room.
2. Set Temperature
Displays and controls the heater to the temperature at which the thermostat is currently set to.
Press 8 to lower the thermostat and press 9 to raise the thermostat. Pressing both 8 and 9 together will toggle between Celsius and Fahrenheit.
3. Flame Effect Icon
The flame icon will flicker if and when the Flame Effect is turned on. Press 11 to turn the Flame Effect on, and press 10 to turn the Flame Effect off.
4. Purifire™ Icon
The display arrows for the Purifire™ will cycle when turned on. Press 13 to turn the Purifire™ function on, and press 12 to turn Purifire™ off.
!NOTE: The Purifire™ function on this device will control only
those units with the Purifire™ installed.
5. Heat Off Indicator
This function manually overrides the thermostat control and prevents the fireplace’s heater from coming on.
To do this, press 8 to decrease Set Temperature to any temperature below 0o C or 32o F. To reactivate heat from “HEAT OFF” setting, press 9 to increase the thermostat Set Temperature. The Set Temperature will be displayed starting at 21o C (70o F), replacing the “HEAT OFF” icon.
6. Function Lock Indicator
Enabling this function will lock out the Wall Switch Remote Control so as to prevent the current settings from being changed.
To Enable, press 8, 9, and 10 sequentially. To disengage, press 8, 9 and 10 sequentially again. The Indicator icon will be displayed when enabled.
18 | www.dimplex.com |