Operation
Figure 20
A | B | C |
|
| D |
•OFF (center): Makes the unit inoperable.
•MANUAL (top): All functions of the fireplace are controlled by the On and Off buttons as described above (A, B).
•REMOTE (bottom): All functions of the fireplace are controlled by the Wall Switch Remote Control.
A. On Button
Pressing this button toggles sequentially through the three levels of the fireplace. Pressing once activates Level 1 - flame effect only, twice activates Level 2
-flame effect and Purifire™, three times activates Level 3 - flame effect, Purifire™ and heat.
B. Off Button
Pressing this button at any time will shut the unit off.
C. Manual Selection Switch
Switches the operation of the fireplace between the different modes of the fireplace:
D. LED Indicators
Depicts which of the three (3) levels the fireplace is currently operating at: Level 1 - flame effect only; Level 2 - flame effect and Purifire™; Level 3 - Flame effect, Purifire™ and heat.
!NOTE: The third LED (Level 3) on receiver board will always be illuminated when the Manual Selection Switch is set to REMOTE. The only time that the LED is turned off is when the thermostat is set to “Heat Off”.
16 | www.dimplex.com |