Operation
7.RF Code Function and Change Procedure
In the event that the Wall Switch Remote Control does not work properly with the receiver due to interference from additional wireless signals, this function will allow the RF code to be changed.
To enable this function, press
9 and 12 together. “COD” will appear on the display for five (5) seconds and the RF code will change automatically. Repeat procedure as needed to find a code that operates the fireplace without interference.
14.Low Battery Indicator
When displayed, the indicator will signal that the batteries are low and should be replaced. To further extend battery life, the LED backlighting is turned off when the Low Battery Indicator is displayed.
Other Functions
6 Hour Sleep Timer
This feature ensures all functions are turned off six hours after any last button has been pressed.
To turn this feature on and off press 9, 11, 10, and 8 sequentially.
When activated, “6 Hr” will display for 5 seconds while the rest of the LCD remains blank. For the duration of the 6 hour delay, all functions remain working until the 6 hour time delay runs out. The Set Temperature and Room Temperature icons will alternately display their settings and the “6 Hr” icon display. After 6 hours have passed and all functions are turned off, “6 Hr” will flash until any button is pressed.
!NOTE: If any button is pressed while this function is enabled, the 6 hour timer will start over for another 6 hour period.
If / when deactivated, “- Hr” will display for five (5) seconds.
19