Digital Media manual Installation, DEChub ONE MAU 900TL

Page 1

DECmau 900TL

INSTALLATION

	LKG±8137-93I
DEChub ONE MAU 900TL	DECmau 900TL
	PK±02580±IL

The DECmau 900TL is a Token Ring Multistation Access Unit (MAU). As a member of Digital's Token Ring product family, it operates in a DEChub 900 MultiSwitch, or a single-slot hub (DEChub ONE MAU 900TL). The MAU connects up to eight stations using 100-ohm shielded or unshielded cable with RJ45 connectors, and 150-ohm IBM Type 1 data cable using an impedence matching transformer cable. It operates at 4 or 16 Mb/s and incorporates speed detection. The MAU can also be managed by optional HUBwatch management software.

EK±DTMAU±IN. A01

Image 1

Contents DEChub ONE MAU 900TL InstallationEK±DTMAU±IN. A01 CopyrightFront Panel Rear Panel of DEChub ONE MAU 900TL Install the MAU in the hub Installing a MAU in a DEChub 900 MultiSwitchRemove the single-slot hub if necessary Connect station cables Verify powerSet Autowrap switches Installing a DEChub ONE MAU 900TLConnect power supply Mount MAU optionalCheck LEDs Install a MAU to adjacent MAUs or repeatersRemoving a MAU from a DEChub 900 MultiSwitch Off Flashing LED SummaryHub MAU only DEChub ONE onlyDEChub ONE Configurations DEChub 900 MultiSwitch ConfigurationCabling Shielded Twisted-Pair Cable Configuration Cable Connector SpecificationsMAU Connector Signal Names Total Cable Budget for UTP Level 5 Cable at 4 Mb/s1Then Do This DEChub 900 MultiSwitch and DEChub ONE Problem SolvingThen Do This DEChub 900 MultiSwitch only Product Specification A Hub DEChub ONE Product SpecificationsAssociated Document