Front Panel
1 | 2 |
3
4 
5
6 
PK±02586±IL
7
1 ) Power LED. Lights when the MAU has power.
2 ) Module OK LED. Lights when the MAU passes its
3 ) Ring A/B LEDs. In a hub, either the A LED or the B LED is on to show the ring. In a standalone MAU, both Ring LEDs are always off.
4 ) Speed LEDs. Either the 16 LED or the 4 LED is on to show the ring speed.
5 ) Eight Lobe LEDs. Lights when a station has access to the network.
6 ) Eight Lobe Connectors. Connects a station to the network. The MAU connects up to eight stations with shielded or unshielded
7 ) Reset Switch. Resets the MAU to factory defaults. To reset: while turning on the power, press the reset switch with a pen or screwdriver.
Notes:
The DECmau 900TL has speed detect, which ensures the integrity of the network. At startup, a MAU determines the ring speed based on the speed settings of the majority of the stations on the ring and the Ring Out port. In a hub, the MAU then connects to the appropriate ring in the hub. After startup, speed detect prevents stations with the wrong speed setting from connecting to the net- work.
Network management can override any of the MAU's factory default settings.
DECmau 900TL | 3 |