Rear Panel of DEChub ONE MAU 900TL
1 
2
3
4
5
6
7
8
Note:
The rear panel shown here is used only when the MAU is in a
1 ) Ring In LED. Lights with a Ring In connection.
2 ) Ring Out LED. Lights with a Ring Out connection.
3)Power Connector. Provides power connection for the MAU.
4 ) Ring In Connector. Connects Ring In to the Ring Out connector of a MAU or repeater.
5 ) Ring In Autowrap Switch. Determines whether the MAU automatically loops back when it detects a disconnected link on Ring In. If the Ring In port connects to a device with Digital's Autowrap, set the switch to 1 to enable Autowrap. If the Ring In port connects to a device without Digital's Autowrap, set the switch to 0 to disable Autowrap.
6 ) Ring Out Connector. Connects Ring Out to the Ring In connector of a MAU or repeater.
7) Ring Out Autowrap Switch. Determines whether the MAU automatically loops back when it detects a disconnected link on Ring Out. If the Ring Out port connects to a device with Digital's Autowrap, set the switch to 1 to enable Autowrap. If the Ring Out port connects to a device without Digital's Autowrap, set the switch to 0 to disable Autowrap.
8 ) Not used. Reserved for
4 | DECmau 900TL |