Digital Media Installing a DEChub ONE MAU 900TL, Mount MAU optional, Set Autowrap switches

Installing a DEChub ONE MAU 900TL

￿Mount MAU (optional).

You can place the MAU on a table, mount it on a wall, or mount it in a standard 19-inch rack using a shelf assembly, Digital part number H9544-MS.

For a wall mounting, position two screws 19.7 centimeters (7.75 inches) apart on the wall. Turn screws until tight and then back off two turns. Hang the MAU using the keyholes.

2 Set Autowrap switches.	a.	Set the Ring In and the Ring Out Autowrap
		switches to 1 or 0.
	b.	Set the switch to 1 to enable Autowrap
		when the Ring In or Ring Out port
		connects to a device with Digital's Auto
		wrap, there is only one MAU in the
		network, or the port is not connected to
		the network. Otherwise, set the switch to
		0 to disable Autowrap.
To
power	LKG±8142-93I
supply

3Connect power supply.

a. Connect the power supply cable to the power connector.

b. Plug the power supply into a wall outlet.

DECmau 900TL 7

￿