Lyngdorf Audio DPA-1 owner manual

Page 11

13.Tuner

No function.

14.Channel -/+

Toggles down/up between inputs.

15. Volume Up/down

Increases or decreases the volume in the chosen direction.

16. Up / Down / Left / Right

In normal operation mode the Up/Down toggles between bypass and the available Focus and Global ﬁlters and the Left/Right toggles between neutral and the available voicings.

In menu mode they are used for navigation in the menu system. Pressing and holding down a key changes selected values fast.

17. Enter

Turns the DPA-1 On from stand-by mode with the last selected input and works as Enter in menu sys- tem.

18. No Function.

Image 11

Contents DPA-1 Page Table of Contents Serial Number Registration Operating VoltageUnpacking the DPA-1 Introduction Accessories Controls Front PanelRear Panel Display IndicatorsPage Remote Control Page Connecting to sources and ampliﬁers Connecting the DPA-1Using Main and Line outputs Navigating the Menu System Menu SystemThis is an overview of the entire DPA-1 menu structure Menu TreeVoicing Introduction to RoomPerfectGlobal Listening Focus ListeningRoomPerfect Guided SetupSetting the Measurement Volume Level Room Measurements Focus MeasurementAdding more Room Measurements Calculation of Focus 1 and Global Filters Measure Room Pos Advanced OptionsMeasure Focus Pos RoomCorrection RoomKnowledgeDisp. Brightness Display TimeoutVolume Disp. Timeo DisplayMax. Vol VolumeDef. Vol Input Sensitivity Input NameAdvanced Setup Line Out Main OutMain Out Control Main Out LevelCrossover Frequency RoutingFilter Type DelayFirmware Versions Trigger SetupRemote Control Factory ResetRoomPerfect Troubleshooting Firmware Upgrading Cleaning and Maintenance ConnectorsAudio Technical SpeciﬁcationsMechanical ProtectionMains TriggerTechnical Assistance Voicing Curves Appendix