Technical Specifications
Audio
Parameter | Value | Note |
Balanced input connectors | 3 pin XLR, | Case=Gnd, Pin1=Gnd, |
|
| Pin2=Hot(+), |
Balanced input impedance | 10KOhm | |
Unbalanced input connectors | RCA (phono) jack, | Case=Gnd, Tip=Hot(+) |
Unbalanced input impedance | 10KOhm | |
DAC Out impedance | 50Ohm | Gain According to volume con- |
|
| trol setting. 88 dB = 0 dB with |
|
| sensitivity normal and rel. |
|
| volume 0 dB |
Input sensitivity | 4.4V (2.2V with high sens.) |
|
Unbalanced output | 4.4Vrms |
|
|
|
|
Balanced output | 8.8Vrms |
|
Frequency Response 20 - 20KHz | RoomPerfect Highpass Filter | |
|
| |
THD+N | Neutral voicing - ref 4.4V | |
Digital to Analog |
|
|
S/N Ratio | Neutral voicing - ref 4.4V | |
Digital to Analog |
|
|
Dynamic Range | Neutral voicing - ref 4.4V | |
Digital to Analog |
|
|
THD+N | Neutral voicing - ref 4.4V | |
Analog to Digital |
|
|
S/N Ratio | Neutral voicing - ref 4.4V | |
Analog to Digital |
|
|
Dynamic Range | Neutral voicing - ref 4.4V | |
Analog to Digital |
|
|
THD+N | Neutral voicing - ref 4.4V | |
Analog to Analog |
|
|
S/N Ratio | Neutral voicing - ref 4.4V | |
Analog to Analog |
|
|
Dynamic Range | Neutral voicing - ref 4.4V | |
Analog to Analog |
|
|
Channel Separation | AC Sweep from 125 - 16KHz |
All audio measurements, except frequency response, are measured with a 20KHz
35