Cypress CY7C1332AV25 manual Features, Functional Description, Configuration, Logic Block Diagram

CY7C1330AV25

PRELIMINARYCY7C1332AV25

18-Mbit (512K x 36/1Mbit x 18) Pipelined Register-Register Late Write

Features

•Fast clock speed: 250, 200 MHz

•Fast access time: 2.0, 2.25 ns

•Synchronous Pipelined Operation with Self-timed Late Write

•Internally synchronized registered outputs eliminate the need to control OE

•2.5V core supply voltage

•1.4–1.9V VDDQ supply with VREF of 0.68–0.95V

— Wide range HSTL I/O Levels

•Single Differential HSTL clock Input K and K

•Single WE (READ/WRITE) control pin

•Individual byte write (BWS[a:d]) control (may be tied LOW)

•Common I/O

•Asynchronous Output Enable Input

•Programmable Impedance Output Drivers

•JTAG boundary scan for BGA packaging version

•Available in a 119-ball BGA package (CY7C1330AV25 and CY7C1332AV25)

Functional Description

The CY7C1330AV25 and CY7C1332AV25 are high perfor- mance, Synchronous Pipelined SRAMs designed with late write operation. These SRAMs can achieve speeds up to 250 MHz. Each memory cell consists of six transistors.

Late write feature avoids an idle cycle required during the turnaround of the bus from a read to a write.

All synchronous inputs are gated by registers controlled by a positive-edge-triggered Clock Input (K). The synchronous inputs include all addresses (A), all data inputs (DQ[a:d]), Chip Enable (CE), Byte Write Selects (BWS[a:d]), and read-write control (WE). Read or Write Operations can be initiated with the chip enable pin (CE). This signal allows the user to select/deselect the device when desired.

Power down feature is accomplished by pulling the Synchronous signal ZZ HIGH.

Output Enable (OE) is an asynchronous input signal. OE can be used to disable the outputs at any given time.

Four pins are used to implement JTAG test capabilities. The JTAG circuitry is used to serially shift data to and from the device. JTAG inputs use LVTTL/LVCMOS levels to shift data during this testing mode of operation.

Configuration

CY7C1330AV25 – 512K x 36

CY7C1332AV25 – 1M x 18

Logic Block Diagram

Clock

K,K Buffer

Ax	CONTROL
CE	and WRITE
	LOGIC

WE

BWSx

ZZ

D Data-In REG.

CE Q (2stage)

512Kx36

1Mx18

MEMORY

ARRAY

OUTOUT REGISTERS and LOGIC

DQx

OE

	AX	DQX			X
				BWS
512Kx36	X = 18:0	X = a, b, c, d	X = a, b, c, d
1Mx18	X = 19:0	X = a, b	X = a, b

Cypress Semiconductor Corporation	•	198 Champion Court • San Jose, CA 95134-1709	•	408-943-2600
Document No: 001-07844 Rev. *A		Revised September 20, 2006

[+] Feedback