Mark Levinson 532 Audio Channel Inputs, Loudspeaker Binding Posts, Single-Ended Inputs

Page 13

Nº532 Power Amplifier

Note The audio outputs of this power amplifier are considered Class 2 (CL2) circuits in North America. This means the wire connected between this amplifier and the speaker(s) shall be rated at minimum Class 2 (CL2) and shall be installed according to the U.S. National Electrical Code (NEC) Article 725 or Canadian Electrical Code (CEC) Section 16.

Audio Channel Inputs

0USH

0INª

0INª

0INª

"ALANCEDªFEMALEª8,2 )NPUTª#ONNECTOR

0INª!SSIGNMENTS

sªª0INªªª3IGNALª'ROUND

sªª0INªªª3IGNALª ª.ON)NVERTING sªª0INªªª3IGNALªnª)NVERTING sªª#ONNECTORª'ROUNDª,UGªª#HASSISª'ROUND

Loudspeaker Binding Posts

Note

One balanced and one single-ended (unbalanced) connector is available for each audio channel input.

Single-Ended Inputs

These RCA connectors accept single-ended input from preamplifiers with singled-ended (RCA) outputs. Single-ended input signals are converted to balanced signals at the input stage of the amplifier, and are handled as balanced signal thereafter.

If your preamplifier does not support balanced connection to the power amplifier, connect the single-ended output to the RCA input on the amplifier. To reduce the chance of noise pickup at the (otherwise unterminated) inverting input of the XLR, insert the provided U-shaped shorting strap between pins #1 and #3 of the XLR connector. The shorting strap is installed at the factory.

Balanced Inputs

9

 

Accepts a signal from a preamplifier with balanced outputs via the high quality XLR connector. Before connecting to the XLR connector on the rear panel of the power amplifier, verify that the shorting straps between pins #1 and #3 of the XLR input connectors are not in place. If you need to remove the strap, be sure to save them for future use as these straps must be in place when using the single-ended RCA connectors to reduce noise pickup.

The pin assignments, shown on the left, of the XLR-type female input connector are consistent with the standards adopted by the Audio Engineering Society. Refer to the operating manual of your preamplifier to ensure that the pin assignments of its balanced output connectors correspond to the Mark Levinson Nº532 power amplifier. If not, wire the cables so that the appropriate output pin connects to the equivalent input pin.

The Nº532 has four custom-made, gold-plated, high-current loudspeaker binding posts, two for each output channel. The positive binding posts, labeled + (positive), are red; the negative binding posts are black and are labeled – (negative).

Ensure when connecting the loudspeaker that at least one positive and one negative binding post is used. There is NO ground reference.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents No532 Power Amplifier FCC Notice Iii Important Safety InstructionsDocumentation Conventions Safety Terms & SymbolsMark Levinson Table of Contents Product Description IntroductionQuantity What’s in the BoxPlacement Installation ConsiderationsProduct Registration UnpackingPower Requirements Operating States Front Panel Status LED Standby Button Power Power ButtonStandby Button Mark Levinson Status LED Rear PanelLoudspeaker Binding Posts Audio Channel InputsSingle-Ended Inputs Balanced InputsTrigger Input Output Power Save Mode Switch Link2 Ports Network SetupEthernet Port AC Input Material Requirements Computer Connecting the Cables Internal Web To Connect Using a Router O532 ComputerTo Connect Without a Router Crossover Cable No532 ComputerNetwork Setup Parameters Connecting With Dhcp Recommended Network Setup for Windows XP Setting Up ComputerTo change the Host Name of the Nº532 Network Setup for Windows Connecting With Static IP Addressing To change the Host Name of the Nº532 Direct Connection ML Net Masters and Slaves Connecting DevicesDiscovering Slaves Status Reporting Fault Reporting ML Net and Link2 Link2No Power No Output TroubleshootingCan’t Assign in ML Net Mark Levinson ML Net Fault Conditions Fault ProtectionCare & Maintenance Restoring Factory DefaultsInput & Output Connectors SpecificationsManufacturer Declaration of Conformity

532 specifications

The Mark Levinson No. 532 is a high-performance power amplifier that exemplifies the best in audio technology. Renowned for delivering unparalleled sound quality, the No. 532 combines advanced engineering with state-of-the-art components to create an audio experience that meets the demands of audiophiles and professionals alike.

One of the standout features of the No. 532 is its robust power output. Properly equipped to deliver up to 300 watts per channel into 8 ohms, and even more into lower impedances, this amplifier ensures that it can drive a wide range of speakers with ease. This impressive power performance is complemented by its class AB topology, which strikes an optimal balance between efficiency and sound fidelity, providing listeners with rich, full-bodied audio reproduction across all frequencies.

The No. 532 showcases Mark Levinson's hallmark meticulous craftsmanship. The unit is built using premium-grade materials, featuring a solid chassis that minimizes resonance and external interference. The elegantly designed exterior houses advanced circuitry, including a fully balanced design that reduces noise and distortion, allowing the amplifier to deliver crystal-clear sound.

Incorporating proprietary technologies, the No. 532 employs the Mark Levinson's custom-built output devices and a sophisticated power supply that guarantees steady performance and dynamic audio reproduction at any volume level. Additionally, the amplifier features an intelligence-driven thermal management system, ensuring optimal performance while preventing overheating during extended use.

User-friendly features enhance the listening experience further. The No. 532 includes multiple inputs, facilitating seamless integration into various audio systems. It also has an intuitive interface that allows users to monitor performance and make adjustments with ease.

Finally, the Mark Levinson No. 532 amplifier is not just about raw power; it excels in sound transparency and detail. It delivers an expansive soundstage, allowing listeners to experience audio as intended by the creators, capturing the subtleties of every instrument and vocal nuance. This makes the No. 532 a cornerstone choice for those committed to experiencing music in its most accurate form.

In conclusion, the Mark Levinson No. 532 stands out for its superior build quality, exceptional power capabilities, and advanced technological features, ultimately providing an audio performance that is both profound and engaging. Whether for personal enjoyment or professional use, this amplifier is designed for those who demand the finest in high-fidelity audio.
Top Page Image Contents