Mark Levinson 532 owner manual Mark Levinson

Page 28

No Response to

Commands in ML Net

Link2 Not Working

24

No Connectivity Via

Ethernet

If All Else Fails...

Mark Levinson

1.Verify that the master device and the Nº532 are properly connected together with a router.

2.Verify that the Nº532 network setup is correct. Access to the internal Web page via a computer is required to verify the network settings of the Nº532.

3.If status information is received on the master device, but commands cannot be sent to the amplifier, then verify that a Link2 connection does not also exist to the amplifier. If both Link2 and ML Net are connected to the amplifier, the Nº532 ignores ML Net commands but status information is still sent.

1.Verify that the master device and the amplifiers are properly daisy-chained.

2.Refer to the product documentation of each device to verify compatibility and the proper cabling.

3.Power down all of the devices, then power up the master device, followed by each slave device. Allow each device to go through its initialization process before powering up the next device.

Then cycle the master device through Standby mode. The Standby LEDs should now be blinking in unison.

•Verify that the network cables are properly connected between the router, switch, or hub and the Nº532. If connecting to a computer, verify that the computer network cable is in the correct port.

•Verify the age of the router, switch, or hub. There may be a communication issue with the Nº532 and older network devices. Power cycle the Nº532 and use a newer router, switch, or hub between the network and the Nº532.

•If connected directly to the computer, make sure a crossover cable is used.

•Verify that the router and computer have valid IP addresses.

1.Power-cycle the Nº532, waiting at least 10 seconds between powering the Nº532 off and on.

2.Restore the default settings on the internal web page.

3.Visit www.marklevinson.com and search the knowledgebase for more information.

4.Contact your Mark Levinson dealer.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents No532 Power Amplifier FCC Notice Important Safety Instructions IiiDocumentation Conventions Safety Terms & SymbolsMark Levinson Table of Contents Introduction Product DescriptionWhat’s in the Box QuantityInstallation Considerations PlacementProduct Registration UnpackingPower Requirements Operating States Front Panel Status LED Standby Button Power Power ButtonStandby Button Rear Panel Mark Levinson Status LEDAudio Channel Inputs Loudspeaker Binding PostsSingle-Ended Inputs Balanced InputsTrigger Input Output Power Save Mode Switch Link2 Ports Network SetupEthernet Port AC Input Material Requirements Computer Connecting the Cables To Connect Using a Router O532 Computer Internal WebTo Connect Without a Router Crossover Cable No532 ComputerNetwork Setup Parameters Connecting With Dhcp Recommended Network Setup for Windows XP Setting Up ComputerTo change the Host Name of the Nº532 Network Setup for Windows Connecting With Static IP Addressing To change the Host Name of the Nº532 Direct Connection Masters and Slaves Connecting Devices ML NetDiscovering Slaves Status Reporting Fault Reporting Link2 ML Net and Link2No Power No Output TroubleshootingCan’t Assign in ML Net Mark Levinson Fault Protection ML Net Fault ConditionsRestoring Factory Defaults Care & MaintenanceSpecifications Input & Output ConnectorsDeclaration of Conformity Manufacturer

532 specifications

The Mark Levinson No. 532 is a high-performance power amplifier that exemplifies the best in audio technology. Renowned for delivering unparalleled sound quality, the No. 532 combines advanced engineering with state-of-the-art components to create an audio experience that meets the demands of audiophiles and professionals alike.

One of the standout features of the No. 532 is its robust power output. Properly equipped to deliver up to 300 watts per channel into 8 ohms, and even more into lower impedances, this amplifier ensures that it can drive a wide range of speakers with ease. This impressive power performance is complemented by its class AB topology, which strikes an optimal balance between efficiency and sound fidelity, providing listeners with rich, full-bodied audio reproduction across all frequencies.

The No. 532 showcases Mark Levinson's hallmark meticulous craftsmanship. The unit is built using premium-grade materials, featuring a solid chassis that minimizes resonance and external interference. The elegantly designed exterior houses advanced circuitry, including a fully balanced design that reduces noise and distortion, allowing the amplifier to deliver crystal-clear sound.

Incorporating proprietary technologies, the No. 532 employs the Mark Levinson's custom-built output devices and a sophisticated power supply that guarantees steady performance and dynamic audio reproduction at any volume level. Additionally, the amplifier features an intelligence-driven thermal management system, ensuring optimal performance while preventing overheating during extended use.

User-friendly features enhance the listening experience further. The No. 532 includes multiple inputs, facilitating seamless integration into various audio systems. It also has an intuitive interface that allows users to monitor performance and make adjustments with ease.

Finally, the Mark Levinson No. 532 amplifier is not just about raw power; it excels in sound transparency and detail. It delivers an expansive soundstage, allowing listeners to experience audio as intended by the creators, capturing the subtleties of every instrument and vocal nuance. This makes the No. 532 a cornerstone choice for those committed to experiencing music in its most accurate form.

In conclusion, the Mark Levinson No. 532 stands out for its superior build quality, exceptional power capabilities, and advanced technological features, ultimately providing an audio performance that is both profound and engaging. Whether for personal enjoyment or professional use, this amplifier is designed for those who demand the finest in high-fidelity audio.
Top Page Image Contents