Mark Levinson 532 owner manual Fault Protection, ML Net Fault Conditions

Page 29

Nº532 Power Amplifier

Fault Protection

The Nº532 is designed to prevent damage to itself and associated components. These extensive features protect both the critical circuitry of the amplifier itself and shield connected loudspeakers from serious damage due to critical high-power levels.

Basic protections designed into the Nº532 include fuses on the AC input line for each transformer to protect against excessive current conditions, such as driving shorted outputs. Inrush limiting prevents premature aging of the power supply components during power-up; once the power supply has been charged, this feature goes off-line until the amplifier is powered up again.

The Nº532 power amplifier also incorporates a controlled clipping circuitry to prevent output devices from saturating. The harsh high-frequency harmonics typically generated by hard-clipped output devices are avoided by the controlled clipping circuitry.

ML Net Fault Conditions

25

The slave devices in an ML Net system can report fault conditions to the master device. Fault condition reports are displayed on the display of the master device when the fault occurs. Some faults may cause the Nº532 to enter Standby or Power Save mode. Power-cycling the Nº532 clears the fault condition, providing the fault condition no longer exists.

Note Some faults do not allow power to be reapplied to the amplifier until the fault condition no longer exists to protect the amplifier from damage.

The fault conditions reported are:

•Slave Device DC Offset – indicates that the Nº532 amplifier is experiencing a signal-related fault.

•Slave Device Over Current – indicates that the Nº532 is experiencing an over-current condition.

•Slave Device Over Temperature – indicates that the Nº532 amplifier is overheating.

•Signal – indicates that the Nº532 has experienced a general signal fault.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents No532 Power Amplifier FCC Notice Iii Important Safety InstructionsMark Levinson Safety Terms & SymbolsDocumentation Conventions Table of Contents Product Description IntroductionQuantity What’s in the BoxPlacement Installation ConsiderationsProduct Registration UnpackingPower Requirements Operating States Standby Button Status LED Standby Button Power Power ButtonFront Panel Mark Levinson Status LED Rear PanelLoudspeaker Binding Posts Audio Channel InputsSingle-Ended Inputs Balanced InputsTrigger Input Output Power Save Mode Switch Ethernet Port AC Input Network SetupLink2 Ports Material Requirements Computer Connecting the Cables Internal Web To Connect Using a Router O532 ComputerTo Connect Without a Router Crossover Cable No532 ComputerNetwork Setup Parameters Connecting With Dhcp Recommended To change the Host Name of the Nº532 Setting Up ComputerNetwork Setup for Windows XP Network Setup for Windows Connecting With Static IP Addressing To change the Host Name of the Nº532 Direct Connection ML Net Masters and Slaves Connecting DevicesDiscovering Slaves Status Reporting Fault Reporting ML Net and Link2 Link2Can’t Assign in ML Net TroubleshootingNo Power No Output Mark Levinson ML Net Fault Conditions Fault ProtectionCare & Maintenance Restoring Factory DefaultsInput & Output Connectors SpecificationsManufacturer Declaration of Conformity

532 specifications

The Mark Levinson No. 532 is a high-performance power amplifier that exemplifies the best in audio technology. Renowned for delivering unparalleled sound quality, the No. 532 combines advanced engineering with state-of-the-art components to create an audio experience that meets the demands of audiophiles and professionals alike.

One of the standout features of the No. 532 is its robust power output. Properly equipped to deliver up to 300 watts per channel into 8 ohms, and even more into lower impedances, this amplifier ensures that it can drive a wide range of speakers with ease. This impressive power performance is complemented by its class AB topology, which strikes an optimal balance between efficiency and sound fidelity, providing listeners with rich, full-bodied audio reproduction across all frequencies.

The No. 532 showcases Mark Levinson's hallmark meticulous craftsmanship. The unit is built using premium-grade materials, featuring a solid chassis that minimizes resonance and external interference. The elegantly designed exterior houses advanced circuitry, including a fully balanced design that reduces noise and distortion, allowing the amplifier to deliver crystal-clear sound.

Incorporating proprietary technologies, the No. 532 employs the Mark Levinson's custom-built output devices and a sophisticated power supply that guarantees steady performance and dynamic audio reproduction at any volume level. Additionally, the amplifier features an intelligence-driven thermal management system, ensuring optimal performance while preventing overheating during extended use.

User-friendly features enhance the listening experience further. The No. 532 includes multiple inputs, facilitating seamless integration into various audio systems. It also has an intuitive interface that allows users to monitor performance and make adjustments with ease.

Finally, the Mark Levinson No. 532 amplifier is not just about raw power; it excels in sound transparency and detail. It delivers an expansive soundstage, allowing listeners to experience audio as intended by the creators, capturing the subtleties of every instrument and vocal nuance. This makes the No. 532 a cornerstone choice for those committed to experiencing music in its most accurate form.

In conclusion, the Mark Levinson No. 532 stands out for its superior build quality, exceptional power capabilities, and advanced technological features, ultimately providing an audio performance that is both profound and engaging. Whether for personal enjoyment or professional use, this amplifier is designed for those who demand the finest in high-fidelity audio.
Top Page Image Contents