Mark Levinson 532 owner manual Direct Connection

Page 23

Nº532 Power Amplifier

Direct Connection

If you are not using a router, use this procedure to connect directly to a computer. For the computer to find the Nº532, the TCPIP and LAN settings of the computer must be set up. Refer to the previous procedure, “Setting up the Computer” for instructions.

Connect one Nº532 power amplifier to the computer, as described in the earlier “Connecting the Cables” section. Make sure that both the amplifier and the computer are powered off before connecting.

1. Press the Power button on the Nº532.

2. On the computer, open the Internet Explorer Web browser.

3. On the address line (URL), type the static IP address of the Nº532 (“192.168.50.3” is the default) and press Enter. There may be a short delay before the Nº532 Web page loads.

4. The Home tab of the Nº532 internal Web page is now displayed. The tab is in red text to indicate that it is the current page. The top of the page provides the general status of the Nº532. The bottom of the page contains the network parameters setup.

5. Update the Host Name of the amplifier. Each Nº532 in the network MUST have a unique name.

To change the Host Name of the Nº532:

19

A. Type the new name into the white box to the right of the parameter. The new name must be made from the capital letters, A to Z, and the numbers, 0 to 9. Underscores may also be used.

B. Click the Submit button to save the new value.

6.Update the Static IP address of the amplifier. Each Nº532 in the network MUST have a unique Static IP address. Be sure to make note of the new Host Name and IP address.

7.Enter the new host name or IP address into the browser. The Nº532 Web page loads, reflecting the new information.

8.Power down the Nº532.

The network connection is now complete. Repeat this procedure with any additional Nº532 power amplifiers.

Page 22 Page 24
Image 23
Page 22 Page 24
Contents No532 Power Amplifier FCC Notice Iii Important Safety InstructionsMark Levinson Safety Terms & SymbolsDocumentation Conventions Table of Contents Product Description IntroductionQuantity What’s in the BoxUnpacking Installation ConsiderationsPlacement Product RegistrationPower Requirements Operating States Standby Button Status LED Standby Button Power Power ButtonFront Panel Mark Levinson Status LED Rear PanelBalanced Inputs Audio Channel InputsLoudspeaker Binding Posts Single-Ended InputsTrigger Input Output Power Save Mode Switch Ethernet Port AC Input Network SetupLink2 Ports Material Requirements Computer Connecting the Cables Crossover Cable No532 Computer To Connect Using a Router O532 ComputerInternal Web To Connect Without a RouterNetwork Setup Parameters Connecting With Dhcp Recommended To change the Host Name of the Nº532 Setting Up ComputerNetwork Setup for Windows XP Network Setup for Windows Connecting With Static IP Addressing To change the Host Name of the Nº532 Direct Connection ML Net Masters and Slaves Connecting DevicesDiscovering Slaves Status Reporting Fault Reporting ML Net and Link2 Link2Can’t Assign in ML Net TroubleshootingNo Power No Output Mark Levinson ML Net Fault Conditions Fault ProtectionCare & Maintenance Restoring Factory DefaultsInput & Output Connectors SpecificationsManufacturer Declaration of Conformity

532 specifications

The Mark Levinson No. 532 is a high-performance power amplifier that exemplifies the best in audio technology. Renowned for delivering unparalleled sound quality, the No. 532 combines advanced engineering with state-of-the-art components to create an audio experience that meets the demands of audiophiles and professionals alike.

One of the standout features of the No. 532 is its robust power output. Properly equipped to deliver up to 300 watts per channel into 8 ohms, and even more into lower impedances, this amplifier ensures that it can drive a wide range of speakers with ease. This impressive power performance is complemented by its class AB topology, which strikes an optimal balance between efficiency and sound fidelity, providing listeners with rich, full-bodied audio reproduction across all frequencies.

The No. 532 showcases Mark Levinson's hallmark meticulous craftsmanship. The unit is built using premium-grade materials, featuring a solid chassis that minimizes resonance and external interference. The elegantly designed exterior houses advanced circuitry, including a fully balanced design that reduces noise and distortion, allowing the amplifier to deliver crystal-clear sound.

Incorporating proprietary technologies, the No. 532 employs the Mark Levinson's custom-built output devices and a sophisticated power supply that guarantees steady performance and dynamic audio reproduction at any volume level. Additionally, the amplifier features an intelligence-driven thermal management system, ensuring optimal performance while preventing overheating during extended use.

User-friendly features enhance the listening experience further. The No. 532 includes multiple inputs, facilitating seamless integration into various audio systems. It also has an intuitive interface that allows users to monitor performance and make adjustments with ease.

Finally, the Mark Levinson No. 532 amplifier is not just about raw power; it excels in sound transparency and detail. It delivers an expansive soundstage, allowing listeners to experience audio as intended by the creators, capturing the subtleties of every instrument and vocal nuance. This makes the No. 532 a cornerstone choice for those committed to experiencing music in its most accurate form.

In conclusion, the Mark Levinson No. 532 stands out for its superior build quality, exceptional power capabilities, and advanced technological features, ultimately providing an audio performance that is both profound and engaging. Whether for personal enjoyment or professional use, this amplifier is designed for those who demand the finest in high-fidelity audio.
Top Page Image Contents