Mark Levinson 532 owner manual ML Net, Masters and Slaves Connecting Devices

Page 24

Note

Masters and Slaves

20

Note

Connecting the

Devices

Mark Levinson

ML Net

The ML Net protocol allows you to control two or more Mark Levinson products simultaneously via the Ethernet port.

Since ML Net operates through the use of a router and the Ethernet connection, all devices must have networking capability. Refer to the previous section of this manual, “Network Setup”, to set up the Nº532 for network operation.

ML Net uses a single “Master” device to control specific functions of other ML Net-capable Mark Levinson products. An ML Net system can only have one Master device; all other devices in the system become “Slaves”. Slave devices receive and respond to the commands of the master device.

The Nº532 dual monaural power amplifier is always a slave device. A separate master device must be used in conjunction with the Nº532 amplifier.

As a slave device, the Nº532 responds to the following ML Net commands sent from the master device:

•Status Reporting – status conditions of the Nº532 slave(s) are reported to the master device; status includes Temperature, Session Time, Total On Time, and Fault Reporting.

•Standby State – the master device controls the Standby state of the Nº532 amplifier.

•Synchronized LEDs – the Standby LEDS of the master device and all assigned slave devices blink in unison.

The Status LED on the front panel of the Nº532 does not blink if the amplifier is in the Power Save mode.

After configuring each device on the network, connect all of the devices together. Ensure that all components are powered off or in Standby mode before connecting to the Ethernet ports.

Each device must be connected to the same network and use the same subnet. Refer to the “Network Setup” section for instructions on how to connect the Nº532 to the network.

If more devices are desired than the router can handle, connect the additional devices first to a switch, then connect the uplink of the switch to a normal port on the router.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents No532 Power Amplifier FCC Notice Important Safety Instructions IiiSafety Terms & Symbols Documentation ConventionsMark Levinson Table of Contents Introduction Product DescriptionWhat’s in the Box QuantityInstallation Considerations PlacementProduct Registration UnpackingPower Requirements Operating States Status LED Standby Button Power Power Button Front PanelStandby Button Rear Panel Mark Levinson Status LEDAudio Channel Inputs Loudspeaker Binding PostsSingle-Ended Inputs Balanced InputsTrigger Input Output Power Save Mode Switch Network Setup Link2 PortsEthernet Port AC Input Material Requirements Computer Connecting the Cables To Connect Using a Router O532 Computer Internal WebTo Connect Without a Router Crossover Cable No532 ComputerNetwork Setup Parameters Connecting With Dhcp Recommended Setting Up Computer Network Setup for Windows XPTo change the Host Name of the Nº532 Network Setup for Windows Connecting With Static IP Addressing To change the Host Name of the Nº532 Direct Connection Masters and Slaves Connecting Devices ML NetDiscovering Slaves Status Reporting Fault Reporting Link2 ML Net and Link2Troubleshooting No Power No OutputCan’t Assign in ML Net Mark Levinson Fault Protection ML Net Fault ConditionsRestoring Factory Defaults Care & MaintenanceSpecifications Input & Output ConnectorsDeclaration of Conformity Manufacturer

532 specifications

The Mark Levinson No. 532 is a high-performance power amplifier that exemplifies the best in audio technology. Renowned for delivering unparalleled sound quality, the No. 532 combines advanced engineering with state-of-the-art components to create an audio experience that meets the demands of audiophiles and professionals alike.

One of the standout features of the No. 532 is its robust power output. Properly equipped to deliver up to 300 watts per channel into 8 ohms, and even more into lower impedances, this amplifier ensures that it can drive a wide range of speakers with ease. This impressive power performance is complemented by its class AB topology, which strikes an optimal balance between efficiency and sound fidelity, providing listeners with rich, full-bodied audio reproduction across all frequencies.

The No. 532 showcases Mark Levinson's hallmark meticulous craftsmanship. The unit is built using premium-grade materials, featuring a solid chassis that minimizes resonance and external interference. The elegantly designed exterior houses advanced circuitry, including a fully balanced design that reduces noise and distortion, allowing the amplifier to deliver crystal-clear sound.

Incorporating proprietary technologies, the No. 532 employs the Mark Levinson's custom-built output devices and a sophisticated power supply that guarantees steady performance and dynamic audio reproduction at any volume level. Additionally, the amplifier features an intelligence-driven thermal management system, ensuring optimal performance while preventing overheating during extended use.

User-friendly features enhance the listening experience further. The No. 532 includes multiple inputs, facilitating seamless integration into various audio systems. It also has an intuitive interface that allows users to monitor performance and make adjustments with ease.

Finally, the Mark Levinson No. 532 amplifier is not just about raw power; it excels in sound transparency and detail. It delivers an expansive soundstage, allowing listeners to experience audio as intended by the creators, capturing the subtleties of every instrument and vocal nuance. This makes the No. 532 a cornerstone choice for those committed to experiencing music in its most accurate form.

In conclusion, the Mark Levinson No. 532 stands out for its superior build quality, exceptional power capabilities, and advanced technological features, ultimately providing an audio performance that is both profound and engaging. Whether for personal enjoyment or professional use, this amplifier is designed for those who demand the finest in high-fidelity audio.
Top Page Image Contents