Mark Levinson 532 owner manual Restoring Factory Defaults, Care & Maintenance

Page 30

Mark Levinson

Restoring Factory Defaults

Pressing the Factory Default button on the internal Web page of the amplifier resets all settings to their factory default values. If the internal Web page is not available, there is also a key press sequence available. Follow the instructions below to reset the factory default settings from the front panel.

1.Power off the amplifier.

2.Press and hold the Standby button.

3.Press the Power button to turn on the power.

4.Keep holding down the Standby button until the front panel LED blinks four times.

5.Release the Standby button.

Now reset to its factory default state, the amplifier will reinitialize.

Care & Maintenance

26

The Nº532 requires routine care and maintenance to ensure optimal performance. The bulleted items indicate maintenance procedures that should be performed on a regular basis.

Turn off the Nº532 and unplug the rear AC power cord before performing maintenance to the amplifer.

Note Failure to perform the maintenance procedures included in this section may void the manufacturer’s warranty and/or standard repair policies.

•To remove dust from the Nº532 exterior surface, use a feather duster or a low-pressure blower.

•To remove dirt and fingerprints from the Nº532 exterior surface, use a soft, lint-free cloth. DO NOT use metal polish or a cloth made with steel wool.

•If needed, this cloth can be dampened with isopropyl alcohol. DO NOT dampen the cloth with Benzene, acetone-based cleaners, or other commercial cleaners.

•Wipe the Nº532 exterior surface in the same direction as the grain of the brushed aluminum.

Caution! DO NOT apply liquid directly to the No532 exterior surface. Doing so may damage electrical components.

Page 29 Page 31
Image 30
Page 29 Page 31
Contents No532 Power Amplifier FCC Notice Important Safety Instructions IiiSafety Terms & Symbols Documentation ConventionsMark Levinson Table of Contents Introduction Product DescriptionWhat’s in the Box QuantityProduct Registration Installation ConsiderationsPlacement UnpackingPower Requirements Operating States Status LED Standby Button Power Power Button Front PanelStandby Button Rear Panel Mark Levinson Status LEDSingle-Ended Inputs Audio Channel InputsLoudspeaker Binding Posts Balanced InputsTrigger Input Output Power Save Mode Switch Network Setup Link2 PortsEthernet Port AC Input Material Requirements Computer Connecting the Cables To Connect Without a Router To Connect Using a Router O532 ComputerInternal Web Crossover Cable No532 ComputerNetwork Setup Parameters Connecting With Dhcp Recommended Setting Up Computer Network Setup for Windows XPTo change the Host Name of the Nº532 Network Setup for Windows Connecting With Static IP Addressing To change the Host Name of the Nº532 Direct Connection Masters and Slaves Connecting Devices ML NetDiscovering Slaves Status Reporting Fault Reporting Link2 ML Net and Link2Troubleshooting No Power No OutputCan’t Assign in ML Net Mark Levinson Fault Protection ML Net Fault ConditionsRestoring Factory Defaults Care & MaintenanceSpecifications Input & Output ConnectorsDeclaration of Conformity Manufacturer

532 specifications

The Mark Levinson No. 532 is a high-performance power amplifier that exemplifies the best in audio technology. Renowned for delivering unparalleled sound quality, the No. 532 combines advanced engineering with state-of-the-art components to create an audio experience that meets the demands of audiophiles and professionals alike.

One of the standout features of the No. 532 is its robust power output. Properly equipped to deliver up to 300 watts per channel into 8 ohms, and even more into lower impedances, this amplifier ensures that it can drive a wide range of speakers with ease. This impressive power performance is complemented by its class AB topology, which strikes an optimal balance between efficiency and sound fidelity, providing listeners with rich, full-bodied audio reproduction across all frequencies.

The No. 532 showcases Mark Levinson's hallmark meticulous craftsmanship. The unit is built using premium-grade materials, featuring a solid chassis that minimizes resonance and external interference. The elegantly designed exterior houses advanced circuitry, including a fully balanced design that reduces noise and distortion, allowing the amplifier to deliver crystal-clear sound.

Incorporating proprietary technologies, the No. 532 employs the Mark Levinson's custom-built output devices and a sophisticated power supply that guarantees steady performance and dynamic audio reproduction at any volume level. Additionally, the amplifier features an intelligence-driven thermal management system, ensuring optimal performance while preventing overheating during extended use.

User-friendly features enhance the listening experience further. The No. 532 includes multiple inputs, facilitating seamless integration into various audio systems. It also has an intuitive interface that allows users to monitor performance and make adjustments with ease.

Finally, the Mark Levinson No. 532 amplifier is not just about raw power; it excels in sound transparency and detail. It delivers an expansive soundstage, allowing listeners to experience audio as intended by the creators, capturing the subtleties of every instrument and vocal nuance. This makes the No. 532 a cornerstone choice for those committed to experiencing music in its most accurate form.

In conclusion, the Mark Levinson No. 532 stands out for its superior build quality, exceptional power capabilities, and advanced technological features, ultimately providing an audio performance that is both profound and engaging. Whether for personal enjoyment or professional use, this amplifier is designed for those who demand the finest in high-fidelity audio.
Top Page Image Contents