Mark Levinson 532 owner manual Network Setup Parameters Connecting With Dhcp Recommended

Page 18

Note

Network Setup

Parameters

14

Note

Connecting With

DHCP (Recommended)

Mark Levinson

If you are putting more than one Nº532 power amplifier into the network, we recommend connecting and configuring the amplifiers one at a time to avoid identity and control issues between them.

The Web page also has a Restore Defaults button, which resets the parameters to their factory default values. Clicking the Restore Defaults button displays a pop-up asking for confirmation; click yes to restore the factory default values.

Accessible only through the Nº532 internal Web page, the network setup parameters include:

•Static IP Address – provides a fixed IP address. This IP address is NOT automatically selected; it must be entered. If DHCP is on, then an IP address doesn’t need to be entered. IP address 192.168.50.3 is the factory default value.

•Subnet Mask – identifies the subnet mask for the Nº532. This IP address is automatically assigned by DHCP. If DHCP is off, then the address must be entered manually and it must agree with the subnet mask address of the router. IP address 255.255.255.0 is the factory default value.

•Host Name – indicates the network name given to the Nº532 amplifier. The factory default name is NO532.

•DHCP – turns the DHCP capability on or off. When activated, DHCP assigns a unique IP address to the Nº532. The factory default value is On. We recommend leaving DHCP set to On.

If the system contains more than one Nº532 dual monaural power amplifier, the Host Name and IP address of each Nº532 must be changed to unique values.

If you are using a router with DHCP active to connect to the Nº532, use this procedure. Otherwise, skip to the next procedure.

Connect one Nº532 power amplifier to the router, as described in the earlier “Connecting the Cables” section. Make sure that everything is powered off before making cable connections.

1.Turn on the PC and the router. Verify that the router has DHCP active.

2.Press the Power button on the Nº532.

3.On the computer, open the Internet Explorer Web browser.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents No532 Power Amplifier FCC Notice Important Safety Instructions IiiSafety Terms & Symbols Documentation ConventionsMark Levinson Table of Contents Introduction Product DescriptionWhat’s in the Box QuantityProduct Registration Installation ConsiderationsPlacement UnpackingPower Requirements Operating States Status LED Standby Button Power Power Button Front PanelStandby Button Rear Panel Mark Levinson Status LEDSingle-Ended Inputs Audio Channel InputsLoudspeaker Binding Posts Balanced InputsTrigger Input Output Power Save Mode Switch Network Setup Link2 PortsEthernet Port AC Input Material Requirements Computer Connecting the Cables To Connect Without a Router To Connect Using a Router O532 ComputerInternal Web Crossover Cable No532 ComputerNetwork Setup Parameters Connecting With Dhcp Recommended Setting Up Computer Network Setup for Windows XPTo change the Host Name of the Nº532 Network Setup for Windows Connecting With Static IP Addressing To change the Host Name of the Nº532 Direct Connection Masters and Slaves Connecting Devices ML NetDiscovering Slaves Status Reporting Fault Reporting Link2 ML Net and Link2Troubleshooting No Power No OutputCan’t Assign in ML Net Mark Levinson Fault Protection ML Net Fault ConditionsRestoring Factory Defaults Care & MaintenanceSpecifications Input & Output ConnectorsDeclaration of Conformity Manufacturer

532 specifications

The Mark Levinson No. 532 is a high-performance power amplifier that exemplifies the best in audio technology. Renowned for delivering unparalleled sound quality, the No. 532 combines advanced engineering with state-of-the-art components to create an audio experience that meets the demands of audiophiles and professionals alike.

One of the standout features of the No. 532 is its robust power output. Properly equipped to deliver up to 300 watts per channel into 8 ohms, and even more into lower impedances, this amplifier ensures that it can drive a wide range of speakers with ease. This impressive power performance is complemented by its class AB topology, which strikes an optimal balance between efficiency and sound fidelity, providing listeners with rich, full-bodied audio reproduction across all frequencies.

The No. 532 showcases Mark Levinson's hallmark meticulous craftsmanship. The unit is built using premium-grade materials, featuring a solid chassis that minimizes resonance and external interference. The elegantly designed exterior houses advanced circuitry, including a fully balanced design that reduces noise and distortion, allowing the amplifier to deliver crystal-clear sound.

Incorporating proprietary technologies, the No. 532 employs the Mark Levinson's custom-built output devices and a sophisticated power supply that guarantees steady performance and dynamic audio reproduction at any volume level. Additionally, the amplifier features an intelligence-driven thermal management system, ensuring optimal performance while preventing overheating during extended use.

User-friendly features enhance the listening experience further. The No. 532 includes multiple inputs, facilitating seamless integration into various audio systems. It also has an intuitive interface that allows users to monitor performance and make adjustments with ease.

Finally, the Mark Levinson No. 532 amplifier is not just about raw power; it excels in sound transparency and detail. It delivers an expansive soundstage, allowing listeners to experience audio as intended by the creators, capturing the subtleties of every instrument and vocal nuance. This makes the No. 532 a cornerstone choice for those committed to experiencing music in its most accurate form.

In conclusion, the Mark Levinson No. 532 stands out for its superior build quality, exceptional power capabilities, and advanced technological features, ultimately providing an audio performance that is both profound and engaging. Whether for personal enjoyment or professional use, this amplifier is designed for those who demand the finest in high-fidelity audio.
Top Page Image Contents