Mark Levinson 532 owner manual Connecting With Static IP Addressing

Page 21

Nº532 Power Amplifier

Note

Note

Connecting With Static IP Addressing

4.Click the Properties button to open the Local Area Connection Properties menu.

If the computer is not currently connected to an active network, Step 3 has already opened the Local Area Connection Properties menu.

5.Click on Internet Protocol (TCP/IP) line item so that it is highlighted.

6.Click the Properties button.

7.Select the “Use the following IP address” option. The IP address, Subnet mask, and Default gateway boxes are no longer grayed out and can now be modified.

8.Enter the following values:

•IP address: 192.168.50.x

where x stands for a number other than 3

•Subnet mask: 255.255.255.0

•Do not enter a value in the Default gateway parameter.

192.168.50.3 is the default Static IP address for the Nº532. The

17

computer must be on the same subnet and have a unique address.

 

 

 

9.Click “OK” to save and exit the menu.

10.Open the Internet Explorer Web browser.

11. From the menu bar, select the Tools Internet Options menu.

12.Select the Connections tab.

13.Click the LAN Settings button.

14.Verify that “Use a proxy server for your LAN” is NOT checked.

15.Click “OK” to save and exit the program.

If you plan to connect with static IP addresses (DHCP is turned off), use this procedure. Otherwise, skip to the next procedure to connect directly to a computer.

Connect one Nº532 power amplifier to the router, as described in the earlier “Connecting the Cables” section. Make sure that everything is powered off before making cable connections.

Page 20 Page 22
Image 21
Page 20 Page 22
Contents No532 Power Amplifier FCC Notice Iii Important Safety InstructionsSafety Terms & Symbols Documentation ConventionsMark Levinson Table of Contents Product Description IntroductionQuantity What’s in the BoxPlacement Installation ConsiderationsProduct Registration UnpackingPower Requirements Operating States Status LED Standby Button Power Power Button Front PanelStandby Button Mark Levinson Status LED Rear PanelLoudspeaker Binding Posts Audio Channel InputsSingle-Ended Inputs Balanced InputsTrigger Input Output Power Save Mode Switch Network Setup Link2 PortsEthernet Port AC Input Material Requirements Computer Connecting the Cables Internal Web To Connect Using a Router O532 ComputerTo Connect Without a Router Crossover Cable No532 ComputerNetwork Setup Parameters Connecting With Dhcp Recommended Setting Up Computer Network Setup for Windows XPTo change the Host Name of the Nº532 Network Setup for Windows Connecting With Static IP Addressing To change the Host Name of the Nº532 Direct Connection ML Net Masters and Slaves Connecting DevicesDiscovering Slaves Status Reporting Fault Reporting ML Net and Link2 Link2Troubleshooting No Power No OutputCan’t Assign in ML Net Mark Levinson ML Net Fault Conditions Fault ProtectionCare & Maintenance Restoring Factory DefaultsInput & Output Connectors SpecificationsManufacturer Declaration of Conformity

532 specifications

The Mark Levinson No. 532 is a high-performance power amplifier that exemplifies the best in audio technology. Renowned for delivering unparalleled sound quality, the No. 532 combines advanced engineering with state-of-the-art components to create an audio experience that meets the demands of audiophiles and professionals alike.

One of the standout features of the No. 532 is its robust power output. Properly equipped to deliver up to 300 watts per channel into 8 ohms, and even more into lower impedances, this amplifier ensures that it can drive a wide range of speakers with ease. This impressive power performance is complemented by its class AB topology, which strikes an optimal balance between efficiency and sound fidelity, providing listeners with rich, full-bodied audio reproduction across all frequencies.

The No. 532 showcases Mark Levinson's hallmark meticulous craftsmanship. The unit is built using premium-grade materials, featuring a solid chassis that minimizes resonance and external interference. The elegantly designed exterior houses advanced circuitry, including a fully balanced design that reduces noise and distortion, allowing the amplifier to deliver crystal-clear sound.

Incorporating proprietary technologies, the No. 532 employs the Mark Levinson's custom-built output devices and a sophisticated power supply that guarantees steady performance and dynamic audio reproduction at any volume level. Additionally, the amplifier features an intelligence-driven thermal management system, ensuring optimal performance while preventing overheating during extended use.

User-friendly features enhance the listening experience further. The No. 532 includes multiple inputs, facilitating seamless integration into various audio systems. It also has an intuitive interface that allows users to monitor performance and make adjustments with ease.

Finally, the Mark Levinson No. 532 amplifier is not just about raw power; it excels in sound transparency and detail. It delivers an expansive soundstage, allowing listeners to experience audio as intended by the creators, capturing the subtleties of every instrument and vocal nuance. This makes the No. 532 a cornerstone choice for those committed to experiencing music in its most accurate form.

In conclusion, the Mark Levinson No. 532 stands out for its superior build quality, exceptional power capabilities, and advanced technological features, ultimately providing an audio performance that is both profound and engaging. Whether for personal enjoyment or professional use, this amplifier is designed for those who demand the finest in high-fidelity audio.
Top Page Image Contents