Freedom9 IP 800 manual Remote Console Control Bar, Ctrl+Alt+Delete, Single/Double Mouse Mode

freeView IP 800 User’s Manual

However, the Remote Console window can be resized manually in the local window system the same way as other applications.

Note: The Remote Console window must be selected in the local operating system in order for mouse and keyboard input to be sent to the remote host.

5.10.1Remote Console Control Bar

The top bar of the Remote Console window shown in Figure 5-5 contains the control bar. The control bar displays the state of the remote device and also allows the user to change the Remote Console settings.

Figure 5-5: Remote Console Control Bar

Ctrl+Alt+Delete

This button sends the key combination “Control-Alt-Delete” to the remote system (see Section 6 for instructions on defining new key combination buttons).

Auto Adjust button

If the video display becomes distorted, click this button and wait a few seconds while the device tries to automatically readjust the video settings.

Sync mouse button

This button activates the mouse synchronization process. Choose this option to synchronize the local with the remote mouse cursor. This is especially necessary when using accelerated mouse settings on the host system. In general, there is no need to change mouse settings on the host. This button is only available when using double mouse mode.

Single/Double Mouse Mode

This button switches between Single Mouse Mode (only the remote mouse pointer is visible) and Double Mouse Mode (both remote and local mouse pointers are visible and need to be synchronized). Single mouse mode is only available if using SUN JVM 1.3 or higher.

37