Freedom9 Using the freeView IP 800 as a KVM Switch, Push Buttons freeView IP 800 IP-KVM Switch

freeView IP 800 User’s Manual

browser to a state of the art encryption scheme. Figure 5-1shows the dialog box presented by the Internet Explorer 6.0.

Figure 5-1: Encryption Key Length in Internet Explorer

Newer web browsers support strong encryption by default.

5.4Using the freeView IP 800 as a KVM Switch

The power on state of the freeView IP 800:

When you power on KVM switch, it will ask you for the password, the default password value is eight zeros – “00000000”. Key in eight zeros and enter the same value at retype field.

Note: Until you are familiar with the operation of the OSD, don’t change the password – i.e. keep default eight zeros (00000000) value. Otherwise, if you have changed the password and forget the password, you will need to send it back to your distributor to reset the password.

•The Push Buttons freeView IP 800 IP-KVM Switch

Buttons 1 ~ 8 :

Press the button that corresponds to the server you wish to activate.

•PC Port LED Indication:

There are two LED indicators for each port, a Green LED and an Orange LED located above each PC port selection button.

When you select a PC port and the PC is shut down or the PC port is disconnected from the PC, the selected port LED will flash Green. When you select a PC port and the PC is powered on and connected, the selected port LED will be solid Green. For each port that has a PC that is connected and powered on but is not currently the selected port, the LED will be solid Orange.

26