Freedom9 IP 800 manual Unit Reset

Page 71

freeView IP 800 User’s Manual

Once the firmware file has been uploaded, it is checked to see if it is a valid firmware file and whether there were any transmission errors. In the case of an error, the Upload Firmware function will be aborted.

Verify the new version of the firmware, and click “Update”. Note: This process is non reversible and might take a few minutes. Make sure the freeView IP 800 is not powered off during the update process; otherwise the device may be permanently damaged.

After the firmware has been saved, a prompt will appear to reset the device manually. After the unit is reset, the new firmware will be loaded. However, the user will have to log into the unit again.

Note: The firmware update procedure is thorough in looking for errors and inconsistencies, reducing the chances of an error occurring. However, only experienced staff or administrators should perform a firmware update. Ensure that the device is not powered off during the firmware upgrade.

6.5.4Unit Reset

Figure 6-22: Unit Reset

This section allows the user to reset specific parts of the device. The parts include: the keyboard and mouse, the video engine, and the entire device itself. Resetting the device itself is mainly needed to activate a newly updated firmware. It will close all current connections to the

69

Image 71
Contents Rev FreeView IPCopyright and Trademark Information Table of Contents Rack Mount KIT Installation Diagram List of Figures 13 Certificate Settings List of Tables Video Modes Hardware InstallationInitial IP Configuration IntroductionWeb Interface KVM Setup ProgramSync Mouse button Auto Adjust buttonVideo Settings in Options Menu Remote ConsoleWhen The Server Is Non-Operational When The Server Is OperationalType of Failure Detected By FeaturesPackage Contents Model No FreeView IP 800 switch Technical SpecificationsAT to PS/2 keyboard adapter Optional Cable Diagrams PS/2 CableSystem Requirements VGA CableProduct Details Port Rack Mount PS/2 IP-KVM switch Step Connecting The freeView IP 800 To The Host SystemOperation Overview Connect the mouse to the KVM Switch Internet Modem Using a 100 Mbps Connection Using a 10 Mbps ConnectionParameter Value Initial ConfigurationInitial Configuration Via Dhcp Server FreeView IP 800 Setup ProgramFreeView IP 800 Setup Tool Initial Configuration Via Serial ConsoleNet mask Keyboard, Mouse And Video ConfigurationFreeView IP 800 Keyboard Settings IP auto configuration none/dhcp/bootp dhcpAuto Mouse Speed And Mouse Synchronization Remote Mouse SettingsSingle and Double Mouse Modes Host System Mouse SettingsRecommended Mouse Settings SUN Solaris MS Windows 2000/2003 Professional and Server, XPTelnet PrerequisitesPC Port LED Indication Using the freeView IP 800 as a KVM SwitchPush Buttons freeView IP 800 IP-KVM Switch Segment Bank LED Indication Reset Button Bank Bank button and PC 8Keyboard Hot Key Commands To select PC port Daisy Chain Connection Diagram Hot Plug On Screen Display Operation FreeView IP 800 User’s Manual Https//IP address of freeView IP Logging In And Logging OutHttp//IP address of freeView IP Navigation Login ScreenGeneral description Logging OutMain Window Ctrl+Alt+Delete Single/Double Mouse ModeRemote Console Control Bar Scaling Exclusive AccessOptions Monitor OnlyLocal Cursor Mouse HandlingVideo Settings Through The Web Interface Video Settings10 Video Settings Panel Video Settings Through The Remote ConsoleLocal Keyboard Soft KeyboardShow MappingEncoding HotkeysStatus line Remote Console Status LineTelnet Console Remote ControlKVM Console User Management Command DescriptionSet Password Change PasswordUsers And Groups KVM SettingsUser Console User Console Settings PartUser Console Settings Part Miscellaneous Remote Console Settings Keyboard/Mouse Keyboard and Mouse SettingsMouse Speed Miscellaneous Video SettingsVideo Network Device Settings10 Dynamic DNS Dynamic DNS11 Dynamic DNS Scenario 12 Device Security SecurityCertificate 13 Certificate Settings14 SSL Certificate Upload 15 Serial Port Serial PortFreeView IP 800 User’s Manual 16 Date and Time Date And Time17 Event Log Event LogFreeView IP 800 User’s Manual Board Summary Maintenance Device InformationConnected Users Reset Functions20 Event Log List 21 Update Firmware Update Firmware22 Unit Reset Unit ResetFreeView IP 800 User’s Manual Troubleshooting FreeView IP 800 User’s Manual CE Certificate CertificatesPin Assignments Key Codes Figure B-1 English US Keyboard Layout Rack Mount Kit Installation Diagram