Bay Technical Associates RM356 manual Chapter Router Configuration, Configuration Methods

Page 43

Chapter 3

Router Configuration

This chapter contains information about configuring your Model RM356 Modem Router through the built-in Manager interface.

Configuration Methods

If you are using a PC, you have the following two options to configure your router:

•Through FirstGear

FirstGear is an easy-to-use Windows-based utility that leads you through a Quick Setup or an Advanced menu for configuring your router. For FirstGear instructions, refer to Getting Started Using FirstGear for the Model RM356 Modem Router.

•Through the built-in Manager inter face

If you are using a Macintosh or UNIX-based workstation, the built-in Manager interface is the only way that you can configure your router through your computer. However, you can use a PC to configure the router and then connect the router to the Macintosh or workstation after the configuration process is complete.

The built-in Manager interface is accessible through either a serial or a Telnet connection (refer to

“Connecting Through the Serial Port” or “ Connecting Through a Telnet Connection” on page 2-9 of Chapter 2, “ Router Installation and Connection”). If the router has not previously been assigned an IP address, you cannot connect through a Telnet session. You must use a serial connection.

Router Configuration

3-1

Image 43

Contents NETGEAR, Inc Reference Guide for the Model RM356 Modem RouterStatement of Conditions TrademarksEN 55 022 Declaration of Conformance Customer Support Bestätigung des Herstellers/ImporteursCertificate of the Manufacturer/Importer VCCI-2 StatementWorld Wide Web Contents Chapter Router Installation and Connection Chapter Remote Node Configuration Chapter System Maintenance Appendix a Technical Specifications Index Contents Figures Xii Tables System Maintenance Syslog and Accounting Menu Fields Purpose PrefaceAudience Special Message Formats ConventionsUse of Enter, Type, and Press Other Conventions Related PublicationsPage Chapter Introduction FeaturesAbout the Router Key Features TCP/IP Support SupportManagement Support SecurityBasic Router Concepts What is a Router?Routing Information Protocol IP Addresses and the Internet Three Main Address Classes Netmask Example of Subnetting a Class B Address Subnet AddressingNumber of Bits Dotted-Decimal Value Netmask Notation Translation Table for One OctetNetmask Formats Private IP AddressesDotted-Decimal Mask-length Single IP Address Operation Using NAT Single IP Address Operation Using NATDomain Name Server Address Resolution ProtocolIP Configuration by Dhcp Package Contents Chapter Router Installation and ConnectionTelephone Line Checklist ChecklistsISP Checklist Single-User Account Network Checklist Front Panel of the Model RM356 Modem Router Connecting the RouterLabel Activity Description LED DescriptionsConnecting to the Line Port Connecting the Serial Cable OptionalConnecting a Telephone, Fax, or Modem Connecting to the Hub PortsConnecting the Power Adapter Connecting Through the Serial Port Connecting for ConfigurationConnecting Through a Telnet Connection Configuration Methods Chapter Router ConfigurationStart-up Display Powering on the RouterNavigating the Manager Manager Menu CommandsAction Description Manager Main Menu is illustrated in Figure Manager Menu Summary Manager Menu SummaryNumber Menu Title Description Menu 1 General Setup General Setup MenuField Description Example Modem Setup MenuModem Setup Menu Parameters Modem MenusAdvanced Modem Setup Menu Field Descriptions Advanced Modem Setup MenuField Description Default Field Description General Setup MenuEthernet General Setup Menu Filter Sets Ethernet MenuMenu 3 Ethernet Setup Menu Fields Dhcp and TCP/IP SetupRIP Direction Manager Password Setup Information Checklist Chapter Configuration for Internet AccessInternet Access Configuration Configuration for Single-User Account Configuring for a Backup ISP Backup ISP AccountsSwitching to a Backup ISP Chapter Remote Node Configuration Menu 11.1 Remote Node Profile Fields PPP Options on Fields in Menu 11.2 Remote Node PPP Options Editing PPP OptionsScript Options Display Editing Script OptionsField Description Option Page Default Dial-In Setup Chapter Dial-In ConfigurationFields in Menu 13 Default Dial-in Setup Dial-In User Setup Fields in Menu 14.1 Edit Dial-in User More On Clid Page LAN-to-LAN Application Chapter TCP/IP ConfigurationFields in Menu 11.1 Remote Node Profile Fields Remote Node SetupMenu 11.3 Remote Node Network Layer Options Fields RIP Static Route SetupEdit IP Static Route Menu Fields Page Outgoing Packet Filtering Process Chapter Filter ConfigurationRouter Filter Structure Configuring a Filter SetAbbreviations Used if Filter Type Is IP Abbreviations Used in Menu 21.1 Filter Rules SummaryAbbreviation Description TCP/IP Filter Rule Configuring a Filter RuleAbbreviations Used if Filter Type Is GEN IP Protocol TCP/IP Filter Rule Menu FieldsTCP Estab Generic Filter Rule Menu Fields Generic Filter RuleApplying a Filter Set Diagnosing the Situation Reducing Unnecessary Calls by WindowsReference Guide for the Model RM356 Modem Router Implementing the Filter Menu 21 Filter Set ConfigurationShows Menu 21.1.1 TCP/IP Filter Rule Filter Rules Summary Menu Remote Node Profile Menu Applying the FilterSystem Status Chapter System MaintenanceSystem Maintenance Status Menu Fields Command Field Name DescriptionMake an outgoing call Log and Trace Terminal Baud RateSyslog and Accounting View Error LogSystem Maintenance Log and Trace Menu Fields Command FieldField Command Description System Maintenance Syslog and Accounting Menu FieldsSystem Maintenance Diagnostic Menu Fields Diagnostic MenuTrace Display for a Successful TCP/IP Protocol Connection Call Testing and TCP/IP ToolsTrace Display for a Failed TCP/IP Protocol Connection System ToolsRestore Configuration Back Up ConfigurationSoftware Update Call Control Command Interpreter ModeBudget Management BlacklistCall History Page Basic Functioning Chapter TroubleshootingLAN Link LED Testing the LAN Path to Your Router Troubleshooting a TCP/IP Network Using a Ping UtilityTesting the Path from Your PC to a Remote Device Troubleshooting a Remote User Connection Troubleshooting a Remote Node or ISP ConnectionTroubleshooting the Manager Interface Restoring the Default Configuration and Password Trace the call Using the Packet and Log TracePacket Trace Display Definitions Packet Trace Display FormatGeneral Specification Appendix a Technical SpecificationsElectromagnetic Emissions Physical SpecificationsEnvironmental Specifications Interface SpecificationsIndex Dhcp Index Index Index TCP/IP

RM356 specifications

Bay Technical Associates RM356 is a state-of-the-art remote monitoring solution designed for a wide range of industries. It is particularly suited for companies requiring a reliable system for tracking and monitoring operations in real-time. This advanced device combines innovative technologies to deliver unparalleled functionality and performance.

One of the standout features of the RM356 is its robust data acquisition capabilities. The device can interface with various sensors and equipment, enabling it to collect critical data from multiple sources. This real-time data collection allows for immediate analysis and facilitates informed decision-making. The RM356 supports various protocols and standards, making it highly compatible with existing infrastructure.

Another significant characteristic of the RM356 is its advanced communication technology. Equipped with both wired and wireless communication options, including LTE, Wi-Fi, and Ethernet, it ensures seamless connectivity in various environments. This versatility enables businesses to monitor operations remotely, reducing the need for on-site presence and enhancing operational efficiency.

The RM356 also incorporates cutting-edge analytics and reporting tools. Its built-in software allows users to visualize data through intuitive dashboards, making it easier to identify trends and anomalies. These analytics capabilities help organizations optimize processes and address potential issues before they escalate, ultimately improving productivity and reducing operational costs.

Security is a top priority for the RM356. The unit comes with robust encryption and authentication measures to ensure that the data it collects remains secure from unauthorized access. This feature is especially critical for industries handling sensitive information or operating in regulated environments.

Additionally, the RM356 is designed with user-friendliness in mind. Its installation process is straightforward, with comprehensive setup guides available for quick deployment. Once operational, users can easily navigate the system interface, allowing for efficient monitoring and management of their operations.

With its combination of advanced features, reliable communication, data analytics, and strict security measures, Bay Technical Associates RM356 stands out as an excellent choice for businesses looking to enhance their monitoring capabilities. Whether in manufacturing, logistics, energy, or other sectors, the RM356 is poised to deliver improved outcomes and support organizations in their quest for operational excellence.