Reference Guide for the Model RM356 Modem Router
Table
Table | System Maintenance Status Menu Fields | |
|
|
|
Field |
| Description |
|
|
|
Port: |
| This field displays the WAN port number (1). For each channel the screen displays: |
Status |
| The remote node the channel is currently connected to, or the status of the channel |
|
| (Idle, Calling, or Answering). |
Speed |
| The current connecting speed. |
TX Pkts |
| The number of packets transmitted on this channel since reset or manual clear. |
RX Pkts |
| The number of packets received on this channel since reset or manual clear. |
Errors |
| The number of error packets on this channel since reset or manual clear. |
Up Time |
| The time that this channel has been connected to the current remote node. |
|
| |
Total Outcall Time | The total outgoing call time for all WAN ports since the system has been powered on. | |
|
|
|
Ethernet: |
| For the LAN port, the screen displays: |
Status |
| The current status of the LAN port. |
TX Pkts |
| The number of packets transmitted to the LAN. |
RX Pkts |
| The number of packets received from the LAN. |
Collisions |
| The number of collisions. |
|
|
|
Name |
| This field displays the name of your router, which you configured in |
|
| Menu 1 - General Setup. |
|
| |
RAS S/W Version | The version of the current router software. | |
|
| |
Ethernet Address | The Ethernet MAC address assigned to your router. | |
|
| |
LAN Packet Which | This field displays the first 48 octets of the LAN packet that triggered the last outgoing | |
Triggered Last Call | call. Two types of packets are displayed: IP and RAW. By viewing the packet | |
|
| information, you can determine which station has sent a packet to cause the router to |
|
| make an outgoing call. |
|
|
|
System Maintenance |