Bay Technical Associates RM356 manual TCP Estab

Reference Guide for the Model RM356 Modem Router

Table 8-4.	TCP/IP Filter Rule Menu Fields (continued)
Field		Description
TCP Estab		This field is dependent upon the IP Protocol field. This field is inactive (N/A) unless the
		value in that field is 6 (TCP protocol). In this field, you determine what type of TCP
		packets to filter. Two options are available for this field:
		• Yes—Filter match only established TCP connections
		• No—Filter match both initial and established TCP connections (default)
More		In this field, you can determine if you want to pass the packet through the next filter rule
		before an action is taken. Two options are available for this field:
		• Yes
		• No (default)
		If More is Yes, then Action Matched and Action Not Matched is N/A.
Log		In this field, you can determine if you want to log the results of packets attempting to
		pass the filter rule. These results are displayed on the System Log (see “View Error
		Log” on page 9-4). Seven options are available for this field:
		• None—No packets are lo gged (default).
		• Action Matched—Only packets that match the rule parameters are lo gged.
		• Action Not Matched—Only packets that do not match the rule parameters are lo gged.
		Both—All packets are lo gged.
		• Check Next Rule (default)
		• Forward
		• Drop
Action Matched		If the conditions for the filter rule are not met, you can specify what to do with the
Action Not		packet. Three options are available for this field:
Matched		• Check Next Rule (default)
		• Forward
		• Drop

8-6 Filter Configuration