Warranty Card
Antenna connector
2.2.2Software requirements
The AirStation Pro requires the following software to operate:
Windows 95/98/ME, NT or 2000
Internet Explorer 4.0 or higher, or Netscape Navigator 4.0 or higher Internet Explorer is installed as standard on Windows 98 and Windows 2000.
AirStation Manager software
Client Manager software (if you have a Wireless Client)
The AirStation Manager and Client Manager software is provided on the AirStation Series Driver CD. For instructions on installing the software see:
“Installing the AirStation Manager Software” on page 33
Refer to the
Initial setup
To connect all the hardware supplied with the AirStation Pro pack and set up the system, follow these steps.
1Connect the AirStation Pro to a power supply, using the AC/DC power adapter.
Do not use any adapter other than that which is supplied with the AirStation Pro.
The AirStation Pro power light will display green.
2Connect one end of the
3Connect the cable to the PC/Hub.
The procedure for this step differs, depending on whether you are connecting the AirStation Pro directly to a PC or to a hub.
Connecting directly to a PC
Connect the other end of the
Getting Started 8