Cause 2:
Connections to the LAN have not been attached correctly.
Solutions:
If the AirStation Pro is connected to a LAN cable, you must ensure that:
The cable connection to both the computer and the hub is secure.
If the hub is switched on, the Ethernet LED indicator should be flashing.
The LAN cable you are using is of the correct type. You must use straight- through Ethernet cable.
Cause 3:
Network mode is incorrect.
Solutions:
To correct this:
Ensure that the
Checking the ESS-ID for Windows 95/98/ME
To check the
1Open Network Neighbourhood properties and select the Configuration tab.
2Select the appropriate adapter and click Properties.
3The
Checking the ESS-ID for Windows NT
To check the
1
The Network dialog box is displayed.
2Select the Adapters tab.
Highlight the MELCO
Troubleshooting 60