Cause 4:
The protocols are not installed or configured correctly.
Solutions:
To check your TCP/IP protocols, refer to the Appendix chapter, “Checking that the protocols are added” on page 72.
Incorrect protocol configuration will affect the performance of the AirStation Pro. To check where such problems may be arising, it is advised that you check for the following possible protocol errors.
TCP/IP is not installed.
To correct this, install the TCP/IP protocols. Refer to the Appendix chapter, “Adding protocols” on page 75.
TCP/IP protocol is not binding to the network card.
To correct this, you must:
1Install the TCP/IP protocol. Refer to the Appendix chapter, “Adding proto- cols” on page 75.
2Check the number of network adapters that you are trying to bind to the TCP/IP protocol.
The maximum number of network adapters, which can be bound to a TCP/IP protocol is four. If you are trying to bind more than four network adapters to the same TCP/IP protocol, delete one of them or switch the binding to another protocol.
6.2.2Network adapter on your PC cannot be found
This problem could be due to the following reasons:
Cause 1:
The network adapter is not installed correctly.
Troubleshooting 62