Note: Running winipcfg allows you to check the IP address of all network adapters.
Windows NT & Windows 2000
1On the Start menu, select Programs, Command Prompt.
For Windows 2000, select Programs, Accessories, Command Prompt.
2Enter ipconfig /all at the command prompt.
3Press the Enter key.
The IP information is displayed.
Ethernet adapter Local Area Connection |
|
IP address | : 195.100.100.52 |
Subnet Mask | : 255.255.255.0 |
: MELCO | |
| Adapter |
Physical Address | : |
DHCP Enabled | : Yes |
Default Gateway | : 192.168.0.1 |
DNS Servers | : 192.168.0.1 |
Figure 25: IP information
Note: Running ipconfig /all allows you to check the IP address of all network adapters.