AR60X Installation Manual
3.4 Installation Tools
The following tools, not provided by BridgeWave, are required for installing the radio and the antenna:
Screwdriver, slotted 0.1 inch (2.5mm) wide
Openend wrench 11/32 (9mm)
Openend wrench 9/16 (14mm), 2 ea.
Openend wrench 1/2 (13mm)
Ratchet with 6 inch (15cm) extension and 9/16 inch (14mm) deep socket Wire stripper/cutter/crimp tool (1016 gauge)
Electrical tape
Fish tape for pulling cable
Cable tie wraps
Level
Handheld DVM (digital voltmeter) with standard banana plug receptacles
58000517, rev B | 10 |