AR60X Installation Manual
3.6 Antenna and Radio Installation
5. Install – Antenna
Slip antenna over pivot pin, ensuring that the elevation adjust pin is engaged with slot in adaptor plate.
Secure the antenna with two (2) x 3/816 bolts, lock washer, flat washer and nylon washers attach antenna to the alignment plate.
Figure 37
When the radios come from the factory, they are mounted on the back of the antenna in the vertical polarization position, that is, the diamond marking (see figure 38 below) on the front of the radio housing is to the right when viewed from the front of the radio. For horizontal polarization, the radio needs to be removed from the antenna and rotated so the diamond is at the top when viewed from the front.
58000517, rev B | 14 |