BridgeWave manual AR60X Installation Manual

Page 19

AR60X Installation Manual

3. Completed installation of pole mount with right hand offset for the antenna.

Note the position of the elevation adjust hex nut.

Figure 3­5

4.Optional left hand antenna offset mount preparation.

­Remove bolts

­rotate the antenna mounting plate 180º

­replace bolts

­tighten bolts securely

Note the new position of the elevation adjust hex nut.

Figure 3­6

When using the left side radio mount position, the antenna drain plugs must be rotated to the top drain holes and the bottom holes must be open to allow for proper drainage.

13

580­00517, rev B

Image 19
Contents AR60X Wireless Ethernet Links Export Control Copyright Notice & DisclaimerProduct Compatibility Safety Regulatory Information Equipment PrecautionsTable of Contents Purpose of Manual IntroductionPrior Knowledge Contact Information Return Material Authorization RMALine of Sight LOS Equipment ChecklistSite Planning GeneralAntenna Location Link DistanceCabling Grounding & Lightning ­3 14­gauge DC power cable with crimp connectorsEnvironmental Cabling Diagram Equipment Unpacking InstallationQty Description Equipment InventoryInstallation Tools Tighten bolts Securely Antenna Mount InstallationTighten bolts securely AR60X Installation Manual Antenna and Radio Installation ­9 Captive radio bolt detail ­10 Attaching the radio to the back of the antenna ­12 Elevation up/down adjustment Fiber Cabling Cable InstallationOptional Copper Ethernet Cabling Ground Cabling Introduction Ice Shield Canopy InstallationQty Description AR60X Installation Manual Antenna Alignment Auto Calibration States ­10 Quality Voltage Graph 10QUAL and RSL Test Cable Radio Link Status Indicators Network Port Statistics Connecting Network EquipmentContact BridgeWave support to obtain a login account Appendix a TroubleshootingAR60X Installation Manual Distance Appendix B RSL Voltage vs. DistanceLimited Hardware Warranty Std. Limited Warranty & SW LicenseLimitation of Remedy and Liability Provisions