Zhone Technologies Network Device specs

Zhone Technologies, Inc.	IMACS Product Book, Version 4


825460	DSO-DP Card	Provides 4 ports of DS0-DP or G.703 64K. For G.703, clock can be selected to be
		co- directional or contra-directional.

826070	BRI Card	This BRI-U card provides 8 ports of 2-wire 2B1Q interface via a single RJ27X (F),
		50-pin amphenol connector. Adheres to 2B+D format. Supports external timing.
		Can be used to support NTUs for dedicated operation or for connections to BRI-U
		interface devices. Commonly used for BRI Terminal extension.
826170	BRI Card	This BRI-U card provides 8 ports of 2-wire 2B1Q interface via a single RJ27X (F),
		50-pin amphenol connector. Adheres to 2B+D format. Supports external timing.
		Can be used to support NTUs for dedicated operation or for connections to BRI-U
		interface devices. Commonly used for BRI Terminal extension. Provides sealing
		(or wetting) current, 7.5mA or 15mA.
826171	BRI Card	This BRI-U card provides 8 ports of 2-wire 2B1Q interface via a single RJ27X (F),
		50-pin amphenol connector. Adheres to 2B+D format. Supports external timing.
		Can be used to support NTUs for dedicated operation or for connections to BRI-U
		interface devices. Commonly used for BRI Terminal extension. Provides sealing
		(or wetting) current, 7.5mA or 15mA. No “DC signature” feature support.
826270	BRI Card	This BRI-S/T card provides 8 ports of 4-wire interfaces via a single RJ27X (F), 50-
		pin amphenol connector. Adheres to 2B+D format. Supports external timing.
		Provides TE, NT1 and NT2 emulation. Commonly used to provide remote
		extension of four wire BRI CPE devices from an ISDN PBX. Requires external
		power connection (-48V DC) if more than 3 cards installed in IMACS chassis
		unless 891330 and 8908 are used (special cable required).
826361	BRI Card	Supports 8 ports of 2-wire 2B1Q via a single RJ27X connector. Supports LULT
		and LUNT. Supports Bi-directional B1, B2 and D channel. Network clock for bit
		timing to LULT and EOC as per TR000397 using 3 DS0 TDM methods. Support
		Interim Performance Monitoring as per TR-000397 and TR-000829. Provides
		sealing current. No “DC Signature”.
826461	BRI Card	Supports 8 ports of 2-wire 2B1Q via a single RJ27X connector. Supports LULT
		and LUNT. Supports Bi-directional B1, B2 and D channel. Network clock for bit
		timing to LULT and EOC as per TR000397 using 3 DS0 TDM methods. Support
		Interim Performance Monitoring as per TR-000397 and TR-000829. Provides “DC
		Signature” but no sealing current.
826462	BRI Card	Supports 8 ports of 2-wire 2B1Q via a single RJ27X connector. Supports LU, LT,
		LULT and LUNT and network management of NTUs (2560 and 2561). Supports
		Bi-directional B1, B2 and D channel. Network clock for bit timing to LULT and
		EOC as per TR000397 using 3 DS0 TDM methods. Support Interim Performance
		Monitoring as per TR-000397 and TR-000829.
828060	PM-IOR Card	Inter Office Router card is based on Lucent Technologies PortMaster product line.
		Connects 10BaseT Ethernet LAN to T1/E1 WAN. Uses PPP or Frame Relay and
		IP (TCP/IP and IPX) to route up to 1.2 Mbps through WAN. Can assign Nx56/64
		Kbps DS0s. Configure router through RJ-45 console port. Supports SNMP
		network management.

March 2001

Page 44