Zhone Technologies, Inc. |
|
|
| IMACS Product Book, Version 4 |
| |
|
|
|
|
|
|
|
Table |
|
|
|
|
| |
| Model 840160, 840260, 840360 |
|
|
|
|
|
| Physical Interface | Female |
| |||
| Electrical Interface | 4 to 20 mA Active Current Loop |
| |||
| Alarm Input Modes | Active/passive (jumper selectable per port) |
| |||
| Alarm Input Trigger | External circuit opening/closing (software selectable per port) |
| |||
| Alarm Input Power Requirements | Network batter (+48V DC) or system voltage (+12V DC). Needed |
| |||
|
| only in Active Mode |
|
| ||
| Alarm Input Power Source through | Selection applies to all ports in 840160 and 840260. Selection |
| |||
| jumper selection | applies to a group of 14 sensors in 840360. |
| |||
| Alarm Output Modes | Active/standby (software selectable per port) |
| |||
| Alarm Output Trigger | Major alarm/minor alarm/any alarm (software selectable per port) |
| |||
| Alarm Output Power Source | Supplied by external device |
|
| ||
| Alarm Output Action | Open/close |
|
|
|
|
| I/O Ports | 840160 | 840260 |
| 840360 |
|
| 4 | 3 |
| 28 |
| |
| 4 Form C | 4 Form C |
| 4 Form A, 2 Form B, 8 Form C |
| |
| Automatic on power fail | 0 | 1 |
| 1 Form C only |
|
| Model 8403 Buzzer |
|
|
|
|
|
| Type | Piezo buzzer |
|
|
|
|
| Tones | 3kHz internally generated or user supplied via the network |
| |||
| Modes | Local or remote (software selectable) |
| |||
| Model 840360 Telephone Port |
|
|
|
|
|
| Physical Interface | RJ11F |
|
|
|
|
| Type | FXS Loop Start |
|
| ||
| Loop Resistance | 2400 Ohm |
|
|
|
|
| Loop Current | 18 mA to 32 mA |
|
| ||
| Termination Impedance | 600 Ohm |
|
|
|
|
| Nominal Transmit TLP |
| ||||
| Nominal Receive TLP |
| ||||
| PCM Coding |
|
|
|
| |
| Standards Compatibility |
|
|
|
|
|
| UL 1950 | UL standard for safety of information technology equipment |
| |||
| CEN 60 950/A2 | Safety of information technology equipment including electrical |
| |||
|
| business equipment |
|
| ||
| CEN | Electromagnetic compatibility generic immunity standard part 1 |
| |||
|
| for commercial, residential and light industry. |
|
VI. Server Cards
1. ADPCM Voice Compression Server
The 887160 ADPCM (Adaptive Differential Pulse Code Modulation) server card is designed to compress digital and analog voice traffic for transmission over wide area network links. The level of compression for an individual channel is software configurable at 24Kbps, 32Kbps or 40Kbps. This card requires a matching card at the other end to decompress the voice channels to normal 64 Kbps operation. A single ADPCM card is capable of compressing
64 channels of voice simultaneously. Since the ADPCM card is a server card, these 64 channels can be originated from a variety of interfaces, including FXS, FXO, E&M, SRU, BRI, and T1/E1. In a 3.x platform, up to two ADPCM server cards can be supported per IMACS system for a total of 128 compressed voice channels. In a 5.x platform, 3 ADPCM cards could be used to carry a total of 192 voice channels.
March 2001 | Page 66 |