Aiwa CX-NAJ54 manual Remote Control, Before Operation, Setting Power Economizing Mode

REMOTE CONTROL

Inserting batteries

Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries.

When to replace the batteries

The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.

To use SHIFT on the remote control

Buttons 1 have two different functions. One of these functions is indicated on the button, and the other on the plate above the button.

To use the function on the button, simply press the button.

To use the function on the plate above the button, press the button while pressing SHIFT.

To use FUNCTION on the remote control

FUNCTION substitutes for the function buttons (TAPE DECK 1/ 2, TUNER BAND, VIDEO/AUX, CD) on the main unit.

Each time FUNCTION is pressed, the next function is selected cyclically. When tapes are inserted in both decks, each deck is selected with FUNCTION.

•If the remote control is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.

•The remote control may not operate correctly when:

-The line of sight between the remote control and the remote sensor inside the display window is exposed to intense light, such as direct sunlight

-Other remote controls are used nearby (those of a television, etc.)

BEFORE OPERATION

To turn the power on

Press one of the function buttons (TAPE, TUNER, VIDEO/AUX, CD). Playback of the inserted disc or tape begins, or the previously tuned station is received (Direct Play Function).

POWER is also available.

When the power is turned on, the disc compartment may open and close to reset the unit.

To turn the power off

Press POWER.

DEMO(Demonstration)

When the AC cord is plugged into an AC outlet for the first time after purchase, the DEMO will begin in the display. When the power is turned on, the DEMO will end. When the power is turned off, the DEMO will begin again.

When the clock is set, the DEMO will not begin even if the power is turned off.

To deactivate or activate DEMO

Press CLOCK, and clock is displayed in place of the DEMO. Press c to activate.

( For more about the DEMO, see page 20 )

SETTING POWER ECONOMIZING MODE

When you set power economizing mode to “ECO ON” or “ECO AUTO”,the unit reduces power consumption by conducting four ECO operations as follows.

ECO ON

•The unit (all the illumination of the display and the buttons) blacks out when the power is turned off. Only the red indicator lights up.

•If DIMMER (1-3) is selected, the illumination of the display and the buttons brighten for 10 seconds only when you press a button, or turn VOLUME or MULTI JOG.

•The display dimmer mode is set to the dimmest, the button illumination lights off, and the volume is set to the minimum (0)

when the unit turns on by timer recording.

ECO AUTO

•In addition to the three operations of ECO ON, the unit automatically turns itself off if you do not operate it and the

sound source is mute for 10 minutes.

ECO OFF

The power economizing mode does not function.

6 ENGLISH