Multitech MT5600BA manual Assigning Callback Phone Numbers, Front Panel Method, AT Command Method

Page 37
Assigning Callback Phone Numbers

Chapter 6 - Callback Security

7. Press the Enter button again to go to the PASSWORD SETUP screen.

8.Press Æ, Æ to go to the ENTER PASSWORD #2? screen.

9.Repeat steps 3–7 to enter the next password.

10.Repeat as many times as necessary, up to memory location 30, until all passwords have been entered.

Warning: There is no way to review an entry to confirm that it has been entered correctly. If you attempt to look at a password entry by pressing the Enter button for an ENTER PASSWORD #n? screen, it is possible to accidentally erase the entry.

Assigning Callback Phone Numbers

AT Command Method

1.Open a data communication program, such as HyperTerminal.

2.To store a callback phone number in the first memory location, type AT#CBN01=xxxxxxxxxx, where xxxxxxxxxx is the dialing string, and press ENTER. The dialing string can include the digits 0 through 9 and any of the following characters: #, *, comma (,), semicolon (;), W, A, B, C, and D. Up to 30 characters can be used. Example: AT#CBN01=9,16127853000. If a direct connection with password protection, but without hangup and callback, is desired, the first character in the dialing string should be a hyphen (-).

3.To store a callback phone number in the second memory location, type AT#CBN02=xxxxxxxxxx, where xxxxxxxxxx is the dialing string, and press ENTER. Note that the memory location number in the command is incremented by one.

4.Repeat as many times as necessary, through memory location 30, until all dialing strings have been entered.

Front Panel Method

1.Turn on the modem.

2.Starting at the STATUS screen, press the following buttons on the front panel: È, È, Æ, È, È, Æ, È, È, Æ. The ENTER NUMBER #1? screen appears.

3.Press the Enter button on the front panel to select memory location 1. The ENTER NUMBER screen appears.

4.Press the ÇÅ or È button several times to select the first character. If a direct connection, without hangup and callback, is desired, the first character in the dialing string should be a hyphen (-).

5.Press the Æ button to go to the next character in the dialing string. Note: To backspace or to cancel an entry, press Æ several times.

6.The number can be up to 30 characters in length. Repeat steps 4 and 5 until the number is entered, and then press the Enter button to store it. The NUMBER STORED screen should appear.

7. Press the Enter button again to go to the CALLBACK NUMBER screen.

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Data/Fax Modem User Guide MT5600BA/BL SeriesMT5600BA-V.92 MT5600BA-V.90 MT5600BL-V.90 Record of Revisions MultiModemII User GuideTrademarks PatentsTable of Contents Table of ContentsMultiModemII User Guide None of the Indicators Light About AT Commands Chapter 1 - Description and FeaturesFeatures Product DescriptionSafety Warnings Step 1 - Connect the Modem to Your System Connect theTwo-Wire Leased LineConnect the Modem to Your PC Connect the Modem to the Telephone Line Dialup ConnectionConnect the Modem to the AC Power Outlet Connect the Four-Wire Leased LinePower-On Test Connect the Phone to the Modem OptionalInstalling the Modem Driver for Windows 98/Me/2000 XP Step 2 - Install the Modem DriverInstalling the Modem Driver for Windows NT Removing an Old Modem DriverUsing the LCD Panel Step 3 - Setting Your Country or Region CodeUsing the Global Wizard MT5600BA-V.92 OnlyUsing AT Commands Step 4 - Install PhoneToolsHow to Change the Country/Region Code How to Verify the CodeModem Configuration Chapter 3 - Using the Front PanelLED Indicators Option Selection Liquid Crystal Display LCDMenu Structure Trunks Menu OverviewLimbs BranchesLimbs Twigs Status TrunkLimbs Basic Options TrunkBranches TwigsContinued from previous page Basic Options Trunk, continuedAdvanced Options Trunk Advanced Options Trunk, continued Diagnostic Options Trunk Remote Configuration Options TrunkLimb Caller ID Options Trunk Phone Number Memory Options TrunkStatus Menu OptionsBasic Options ASYNC, NORM? Normal asynchronous transmission using the Advanced Options VIEW S-REGISTER SETTINGS. Use the Æ, È, ÇÅ, and Enter buttons to select the number of the S-register whose value you want displayed. To scroll through a list of digits, press the ÇÅ and È buttons. To go to the next position, press the Æ button. To back up or to exit without saving, press the Æ button several times. To display the value, press the Enter button. Same as the Sr? command Diagnostic Options Remote Configuration OptionsPhone Number Memory Options Caller ID Options Chapter 4 - Leased Line Operation Two-Wire SetupFour-Wire Setup Dial Backup and Leased Line Restoral Setup Dial Backup and Leased-Line Restoral10. Press the Æ button to go to the next digit in the number Basic Procedure Chapter 5 - Remote ConfigurationSetup Changing the Remote Configuration PasswordChanging the Remote Escape Character AT Command Method Setup ProceduresChapter 6 - Callback Security Turning Callback Security On and OffAT Command Method Assigning Callback PasswordsFront Panel Method Front Panel Method Assigning Callback Phone NumbersCalling Procedure Command #DBn Callback Enable/Disable Callback Security CommandsCommand #CBN y= - x Store Callback Number Command #CBP y= x Store Callback PasswordCallback Assignments Form LocationPasswordPhone NumberNone of the Indicators Light Chapter 7 - TroubleshootingThe Modem Does Not Respond to Commands The Modem Cannot Connect When Dialing The Modem Disconnects While Online File Transfer Is Slower Than It Should Be The Modem Cannot Connect When AnsweringData Is Being Lost The Modem Doesn’t Work with Caller ID There Are Garbage Characters on the MonitorFax and Data Software Can’t Run at the Same Time FCC Part 68 Telecom Appendix A - Regulatory ComplianceCanadian Limitations Notice Fax Branding StatementInternational Modem Restrictions EMC, Safety, and R&TTE Directive ComplianceNew Zealand Telecom Warning Notice South African Notice Appendix B - Technical Specifications loop Appendix D - Upgrading the Firmware Upgrade OverviewIntroduction Step 1 - Identify the Modem FirmwareStep 4 - Extract the Upgrade Files Step 3 - Download the Upgrade FileStep 2 - Identify the Current Firmware Version Step 7 - Restore Your Parameters Step 6 - Upgrade the Modem’s FirmwareStep 5 - Clear Your Stored Paramenters Using the Terminal Program Minicom to Verify Operation Appendix E - Installing a Modem Under LinuxStandard Linux Serial Port Definitions InstallationCalling the ISP Using the Modem to Call the InternetAnswering Calls 3. Select Dialup Configuration ToolRS-232 Pin Descriptions Appendix F - Pin DescriptionsAppendix F - Pin Descriptions RS-232 Cable PinoutsDTE Mini-DIN 8-pin connector Leased Line PinoutsDCE DB-25 connector HSKi CTS HSKo RTSIndex
Top Page Image Contents