Scientific Atlanta EPX2203, DPX2203 manual WebSTAR Cable Modem Back Panel, Back Panel Components

Page 11

WebSTAR Cable Modem Back Panel

Back Panel Components

The following illustration describes the back panel components of the cable modem.

RESET 12VDC	POWER	1
		1
TELEPHONY		2
TELEPHONY		LINE 2LINE
		3
ETHERNET		1
ETHERNET		4
		4

USB	5
CABLE	6
	6

T10702

1POWER - Connects the cable modem to the DC output of the AC power adapter that is provided with your cable modem

Note: Only use the power cord and the AC power adapter that are provided with your cable modem.

2RESET – Reset-to-Default button (Factory Reset)

CAUTION: This button is for maintenance purposes only. Do not use unless instructed to do so by your cable or telephone service provider!

3LINE 1/LINE 2 – RJ-11 telephone ports connect to home telephone wiring to conventional telephones or fax machines

4ETHERNET - RJ-45 Ethernet port connects to the Ethernet port on your PC

5USB - 12 Mbps USB port connects to the USB port on your PC

6CABLE IN - F-Connector connects to an active cable signal from your cable service provider

CAUTION: Do not connect your PC to both the Ethernet and USB ports at the same time.

Note: You can connect two separate PCs to the cable modem at the same time by connecting one to the Ethernet port and one to the USB port. This dual- connection requires that you purchase two IP addresses from your ISP. See Internet Service: Install the Cable Modem, in Section D of this guide.

10

WebSTAR DPX2203 or EPX2203 VoIP Cable Modem User’s Guide

4004041 Rev A

Image 11

Contents WebSTAR DPX2203 EPX2203 VoIP Cable Modem User’s Guide This Guide OverviewIntroduction This Section Important Rules for Safe OperationRead and Retain These Instructions Cleaning the EquipmentPlacement Important Rules for Safe Operation Grounding Power Cord ProtectionPower Sources Damage that Requires ServiceSection B Before You Begin Check Your Equipment Equipment ChecklistSection C Front and Back Panel Components Front Panel Components WebSTAR Cable Modem Front PanelBack Panel Components WebSTAR Cable Modem Back PanelFunctions of the Front Panel Lights Initial Power Up, Calibration, and RegistrationFront Panel Lights During Normal Operations Normal OperationsFront Panel Lights During Special Conditions Special ConditionsInternet Service Overview Section D Internet Service InstallationSelecting a Location for Your Modem Internet Service Before You BeginContacting Your Local Cable Service Provider Minimum System Requirements for PCs Internet Service System RequirementsInstallation Diagram Internet Service Install the Cable ModemInstalling the Modem for High-Speed Data Service Microsoft Windows 95, 98, 98SE, and ME Internet Service Configure TCP/IPResults Microsoft Windows XP Microsoft WindowsMacintosh Microsoft Windows 98, 98SE, or ME Internet Service Install USB DriversMicrosoft Windows Microsoft Windows XP Frequently Asked Questions Internet Service Frequently Asked QuestionsCommon Troubleshooting Suggestions Internet Service TroubleshootingCheck and Correct Telephone Service Overview Section E Telephone Service InstallationTelephone Service Before You Begin Selecting a Location for Your Modem Telephone Device Types Telephone Service Telephone RequirementsTelephone Wiring Requirements Number of Telephone DevicesInstalling the Cable Modem to Provide Telephone Service Telephone Service Install the Cable ModemInstallation Diagram Installing the Cable Modem Can I use my existing phone number with the cable modem? Telephone Service Frequently Asked QuestionsThere is no dial tone when I lift the telephone handset Telephone Service TroubleshootingSoftware Use Notice TrademarksDisclaimer Documentation Copyright NoticeFCC Declaration of Conformity FCC ComplianceUnited States FCC Compliance FCC Part Canada EMI RegulationIC Industry Canada Notice If You Need Technical Assistance For Information