Telular EVDO manual Using the USB Connection Option, Install the USB Drivers

Page 15

USB Connection Option

Using the USB Connection Option

The preferred method for establishing a data connection with the SX7 is through the Ethernet Port (see “Connect the SX7 to Your Computer” on page 4). However, you may also use the supplied USB cable instead of the Ethernet connection.

The USB connection uses Dial-Up Networking (DUN) to achieve Wireless WAN connectivity to the network. Before setting up a USB connection, you must install the SX7 USB Modem drivers from the CD that was packaged with your SX7.

Install the USB Drivers

1.Insert the CD into your computer’s CD drive.

2.Click Install USB Modem (or explore the CD contents and double-click SX7 Driver Installer.exe). (The installer will launch.)

3.Click Next. (The drivers will be installed.)

4.Click Finish.

Wi PATHTM SX7

13

User Guide

Image 15

Contents Wi Pathtm SX7T Terminal and SX7M Modem User Guide Table of Contents Introduction Getting Started With the Wi Pathtm SX7Your Wi Path SX7 Components Set Up Your SX7 WiPATH SX7 Rear Panel View and ConnectorsSX7 Connections An Overview Battery Compartment Open SX7 Bottom View Connect the SX7 to Your Computer Power Up the SX7 Connect to the Telular Device Manager Using the Telular Device ManagerData Connection The Basics Activating Your Wireless Services on the SX7 For PSD Auto Connect, click Always On Setting Up Your Wireless WAN Data ConnectionStatus Indicators LED Reference Table Status LEDsInstall the USB Drivers Using the USB Connection OptionConnect the SX7 to Your Computer With a USB Cable Set Up a Dial-Up Networking DUN ConnectionUSB Connection Option Voice and Fax Options SX7T Only Using the Voice Calling Features on Your SX7T Using the Voice and Fax Options SX7T OnlyUsing the Fax Function on Your SX7T Phone/Fax Voice/Fax Programming Pstn SettingsBasic Pots Setup Setup Options Setup LANAdvanced Data Connection Options Dhcp Settings Setup Wireless WANSetup Keep Alive Setup Ddns Activation Options Network Routing Network OptionsRIP Version Select v1 or v2 default Network Firewall/Filters Network DMZ Network Port ForwardingAdmin Management Administration OptionsAdmin Firmware Upgrade Admin Factory DefaultsStatus Router Status OptionsStatus LAN Ethernet Status Status LAN USB Status Wireless WAN Status Pstn Options Advanced Settings Advanced Settings Configuring TCP/IP SettingsWindows XP Glossary Glossary, References