Telular EVDO manual Power Up the SX7

Page 8

Using the Telular Device Manager

Power Up the SX7

1.With the Ethernet cable connected to both your computer and the SX7, ensure that your SX7 is off, and power up your computer.

2.Slide the Power Switch from right to left to power up your SX7.

3.Wait a few minutes for the SX7 to initialize. Once the signal strength LEDs are illuminated, you are ready to proceed.

Power Switch

Signal Strength LEDs

Note

If your computer is configured with a preset IP address, you may need to adjust your network settings to automatically retrieve an IP adddress from the SX7.See “ConfiguringTCP/IP Settings” on page 38.

Wi PATHTM SX7

6

User Guide

Image 8

Contents Wi Pathtm SX7T Terminal and SX7M Modem User Guide Table of Contents Your Wi Path SX7 Components IntroductionGetting Started With the Wi Pathtm SX7 SX7 Connections An Overview Set Up Your SX7WiPATH SX7 Rear Panel View and Connectors Battery Compartment Open SX7 Bottom View Connect the SX7 to Your Computer Power Up the SX7 Using the Telular Device Manager Connect to the Telular Device ManagerData Connection The Basics Activating Your Wireless Services on the SX7 Setting Up Your Wireless WAN Data Connection For PSD Auto Connect, click Always OnStatus Indicators Status LEDs LED Reference TableUsing the USB Connection Option Install the USB DriversSet Up a Dial-Up Networking DUN Connection Connect the SX7 to Your Computer With a USB CableUSB Connection Option Voice and Fax Options SX7T Only Using the Voice and Fax Options SX7T Only Using the Voice Calling Features on Your SX7TUsing the Fax Function on Your SX7T Phone/Fax Pstn Settings Voice/Fax ProgrammingBasic Pots Setup Advanced Data Connection Options Setup OptionsSetup LAN Setup Wireless WAN Dhcp SettingsSetup Keep Alive Setup Ddns Activation Options Network Options Network RoutingRIP Version Select v1 or v2 default Network Firewall/Filters Network Port Forwarding Network DMZAdministration Options Admin ManagementAdmin Factory Defaults Admin Firmware UpgradeStatus Options Status RouterStatus LAN Ethernet Status Status LAN USB Status Wireless WAN Status Pstn Options Advanced Settings Windows XP Advanced SettingsConfiguring TCP/IP Settings Glossary Glossary, References