5.Connect the Ethernet (RJ-45) cable to the Ethernet Port on the SX7. (This cable will serve as the connection to your computer in most configurations, including the primary Wireless WAN data connection.)
Ethernet Port
It is recommended that you use the Ethernet connection for your primary Wireless WAN data connection;however, you may also use Dial-Up Networking (DUN) using the supplied USB cable (see “Using the USB Connection Option” on page 12).Before connecting with a USB, install the SX7 USB drivers included on the CD that was packaged with your device (see “Install the USB Drivers” on page 12).
7.Depending on your usage needs, connect RJ-11 phone cables to the Phone (J1) and Phone/Fax (J2) ports (SX7T only).
The Phone (J1) and Phone/Fax (J2) RJ-11 ports are only available on the SX7T terminal model. See “Using theVoice and Fax Options (SX7T Only)” on page 16 for information about setting up your RJ-11 Phone and Phone/Fax jacks.
Connect the SX7 to Your Computer
Before you connect your computer, ensure you do not have an existing landline data connection and that you have either Internet Explorer or FireFox Web browser installed on your computer.
Connect the Ethernet (RJ-45) cable from the SX7 to an available Ethernet port on your computer.
It is recommended that you use the Ethernet connection for your primary Wireless WAN data connection;however, you may also use Dial-Up Networking (DUN) using the supplied USB cable.
