Telular EVDO manual Network Firewall/Filters

Page 32

Advanced Data Connection Options

Network > Firewall/Filters

The Firewall/Filters settings allow you to customize the following access settings for the SX7 on your network.

￿Firewall (SPI): Select Enable to use the SPI (Stateful Packet Inspection) firewall to monitor network connections and reject any that do not match its criteria.

￿LAN Port Filter Range: Select an option (see below) and a range (from 0 to 65535) of ports through which to allow connections.

●Disable: Do not apply a LAN port filter range.

●Both: Use both TCP and UDP port numbers for filtering.

●TCP: Use only TCP (Transmission Control Protocol) port numbers for filtering.

●UDP: Use only UDP (User Datagram Protocol) port numbers for filtering.

￿LAN IP Filter: Select Enable and either Only Allow IP Addresses on the List or Only Deny IP Addresses on the List to allow or deny connections with specific IP addresses. Click Edit IP Filter List to enter the IP addresses to allow or deny (up to 50).

￿LAN MAC Filter: Select Enable and either Only Allow MAC Addresses on the List or Only Deny MAC Addresses on the List to allow or deny connections with specific MAC addresses. Click Edit MAC Filter List to enter the MAC addresses to allow or deny (up to 50).

￿IPSec Pass Through: Select Enable to allow connections to pass through IP Security.

￿PPTP Pass Through: Select Enable to allow connections to pass through Point-to-Point Tunneling Protocol.

Wi PATHTM SX7

30

User Guide

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Wi Pathtm SX7T Terminal and SX7M Modem User Guide Table of Contents Your Wi Path SX7 Components IntroductionGetting Started With the Wi Pathtm SX7 SX7 Connections An Overview Set Up Your SX7WiPATH SX7 Rear Panel View and Connectors Battery Compartment Open SX7 Bottom View Connect the SX7 to Your Computer Power Up the SX7 Using the Telular Device Manager Connect to the Telular Device ManagerData Connection The Basics Activating Your Wireless Services on the SX7 Setting Up Your Wireless WAN Data Connection For PSD Auto Connect, click Always OnStatus Indicators Status LEDs LED Reference TableUsing the USB Connection Option Install the USB DriversSet Up a Dial-Up Networking DUN Connection Connect the SX7 to Your Computer With a USB CableUSB Connection Option Voice and Fax Options SX7T Only Using the Voice and Fax Options SX7T Only Using the Voice Calling Features on Your SX7TUsing the Fax Function on Your SX7T Phone/Fax Pstn Settings Voice/Fax ProgrammingBasic Pots Setup Advanced Data Connection Options Setup OptionsSetup LAN Setup Wireless WAN Dhcp SettingsSetup Keep Alive Setup Ddns Activation Options Network Options Network RoutingRIP Version Select v1 or v2 default Network Firewall/Filters Network Port Forwarding Network DMZAdministration Options Admin ManagementAdmin Factory Defaults Admin Firmware UpgradeStatus Options Status RouterStatus LAN Ethernet Status Status LAN USB Status Wireless WAN Status Pstn Options Advanced Settings Windows XP Advanced SettingsConfiguring TCP/IP Settings Glossary Glossary, References
Top Page Image Contents