Telular EVDO manual Setup Keep Alive

Page 27

Advanced Data Connection Options

Setup > Keep Alive

Keep Alive lets you prevent the wireless network from closing your data connection during extended periods of inactivity by having the unit ping a DNS address at set intervals.

Keep Alive: Select Enable to enable this feature. Select Disable to allow your connection to terminate when the DHCP lease expires (usually 24 hours).

Ping Address: Select DNS1 to use the assigned address. To enter an alternate address, select User Defined and then enter a ping IP address in the User Defined Ping IP Address field that will appear.

Ping Interval: Select an interval for pinging. (Default is 120 seconds.)

Wi PATHTM SX7

25

User Guide

Image 27

Contents Wi Pathtm SX7T Terminal and SX7M Modem User Guide Table of Contents Introduction Getting Started With the Wi Pathtm SX7Your Wi Path SX7 Components Set Up Your SX7 WiPATH SX7 Rear Panel View and ConnectorsSX7 Connections An Overview Battery Compartment Open SX7 Bottom View Connect the SX7 to Your Computer Power Up the SX7 Connect to the Telular Device Manager Using the Telular Device ManagerData Connection The Basics Activating Your Wireless Services on the SX7 For PSD Auto Connect, click Always On Setting Up Your Wireless WAN Data ConnectionStatus Indicators LED Reference Table Status LEDsInstall the USB Drivers Using the USB Connection OptionConnect the SX7 to Your Computer With a USB Cable Set Up a Dial-Up Networking DUN ConnectionUSB Connection Option Voice and Fax Options SX7T Only Using the Voice Calling Features on Your SX7T Using the Voice and Fax Options SX7T OnlyUsing the Fax Function on Your SX7T Phone/Fax Voice/Fax Programming Pstn SettingsBasic Pots Setup Setup Options Setup LANAdvanced Data Connection Options Dhcp Settings Setup Wireless WANSetup Keep Alive Setup Ddns Activation Options Network Routing Network OptionsRIP Version Select v1 or v2 default Network Firewall/Filters Network DMZ Network Port ForwardingAdmin Management Administration OptionsAdmin Firmware Upgrade Admin Factory DefaultsStatus Router Status OptionsStatus LAN Ethernet Status Status LAN USB Status Wireless WAN Status Pstn Options Advanced Settings Advanced Settings Configuring TCP/IP SettingsWindows XP Glossary Glossary, References