Telular EVDO manual Network Options, Network Routing

Page 30

Advanced Data Connection Options

Network Options

Network > Routing

1

Routing settings allow you to control the unit’s network routing configuration. There are two primary options available, by selecting a Working Mode (1): Gateway (NAT on) and

Router (NAT off).

Gateway (NAT on): Select this option (above) only if you need to use a Network Access Translator (NAT) to alter IP packets as they pass through a router or firewall. The following options are available under this configuration:

●Static Routing: Select a Route Entry number (1–20).

●Destination IP: Enter a destination IP address for the selected Route Entry number.

●Subnet Mask: Enter a subnet mask for the selected Route Entry number.

●Default Gateway: Enter the IP address of the default gateway or router.

Repeat for as many Static Routing numbers you wish to set up. To see your currently configured routes, click Show Routing Table.

Wi PATHTM SX7

28

User Guide

Image 30

Contents Wi Pathtm SX7T Terminal and SX7M Modem User Guide Table of Contents Introduction Getting Started With the Wi Pathtm SX7Your Wi Path SX7 Components Set Up Your SX7 WiPATH SX7 Rear Panel View and ConnectorsSX7 Connections An Overview Battery Compartment Open SX7 Bottom View Connect the SX7 to Your Computer Power Up the SX7 Using the Telular Device Manager Connect to the Telular Device ManagerData Connection The Basics Activating Your Wireless Services on the SX7 Setting Up Your Wireless WAN Data Connection For PSD Auto Connect, click Always OnStatus Indicators Status LEDs LED Reference TableUsing the USB Connection Option Install the USB DriversSet Up a Dial-Up Networking DUN Connection Connect the SX7 to Your Computer With a USB CableUSB Connection Option Voice and Fax Options SX7T Only Using the Voice and Fax Options SX7T Only Using the Voice Calling Features on Your SX7TUsing the Fax Function on Your SX7T Phone/Fax Pstn Settings Voice/Fax ProgrammingBasic Pots Setup Setup Options Setup LANAdvanced Data Connection Options Setup Wireless WAN Dhcp SettingsSetup Keep Alive Setup Ddns Activation Options Network Options Network RoutingRIP Version Select v1 or v2 default Network Firewall/Filters Network Port Forwarding Network DMZAdministration Options Admin ManagementAdmin Factory Defaults Admin Firmware UpgradeStatus Options Status RouterStatus LAN Ethernet Status Status LAN USB Status Wireless WAN Status Pstn Options Advanced Settings Advanced Settings Configuring TCP/IP SettingsWindows XP Glossary Glossary, References