Cisco Systems ONS 15200 manual ONS 15201 SCU

Page 29

Chapter 3 Product Hardware

Modularity and Ancillary Equipment

Caution

Caution

Caution

ONS 15252 Releases 1.0.1 and later include a fan unit. Before using the Release 1.0.1 shelf, you must install the fan unit. Do not use the fan unit with a Release 1.0 shelf. See the “Fan Unit” section on page 3-4for more information about the fan unit.

You must install the fan unit in a Release 1.0.1 shelf. Running the Release 1.0.1 shelf without the fan unit will result in a unit that is not compliant to any specifications, nor is warranted or supported by Cisco. In addition, such usage may result in equipment damage.

Do not install the fan unit in a Release 1.0 shelf. Running the Release 1.0 shelf with a fan unit will result in a unit that is not compliant to any specifications, nor is warranted or supported by Cisco. In addition, such usage may result in equipment damage.

ONS 15252 Releases 1.0.1and later include an updated Network Adaptation module (NAM). The Release 1.0.1 NAM has a “NEBS-3 compliant” label on the faceplate, whereas the previous version of the NAM does not have a faceplate label. The Release 1.0.1 shelf requires the Release 1.0.1 NAM. You can also use Release 1.0.1 NAMs in the Release 1.0 shelf. See the Cisco ONS 15200 Module Handbook for more information about the NAM.

Placing NAMs without the “NEBS-3 compliant” label into an Release 1.0.1 shelf may result in equipment damage.

3.1.2 ONS 15201 SCU

The ONS 15201 SCU communicates with the other nodes in the ONS 15200 system on a specific wavelength or channel. The SCU uses a single CLIP module. From the DWDM layer, several channels of information, each occupying a wavelength, enter the ONS 15201 SCU. Each DWDM channel of information can enter the ONS 15201 SCU from the A side, the B side, or the A side and B side.

The Collector Filter module (CFM) drops and transfers the specific channel or wavelength intended for the ONS 15201 SCU to the CLIP module. For protected channels, the CFM drops the channel from the A side and B side. For unprotected channels, the CFM drops the channel from either the A side or B side.

The CLIP transfers information originating at the ONS 15201 to the CFM for protected channels. The CFM splits the information and transmits it at a specific wavelength or channel in opposite directions on the A side and B side. The CFM does not split unprotected channels; it transmits them directly to either the A side or B side. Information carried on a wavelength or channel intended for another ONS 15200 node passes through the ONS 15201 SCU without interference except for the insertion loss caused by the unit. Figure 3-3shows a functional representation of an ONS 15201 SCU.

Cisco ONS 15200 Product Description

 

78-13766-01

3-3

 

 

 

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Corporate Headquarters Cisco ONS 15200 Product DescriptionCisco ONS 15200 Product Description N T E N T S Alarms Acronyms A-1 Contents Cisco ONS 15200 Product Description 78-13766-01 G U R E S Viii NCB Indicators Tables Cisco ONS 15200 Product Description 78-13766-01 Related Documentation Manual StructureWorld Wide Web Relevant StandardsObtaining Documentation Ordering Documentation Optical Networking Product Documentation CD-ROMDocumentation Feedback Obtaining Technical AssistanceTechnical Assistance Center Cisco.comCisco TAC Escalation Center Xvi Unprotected Channels Optical System DescriptionOptical Channels Unprotected channels in an ONS 15200 system Protected ChannelsOptically-fiber protected channels in an ONS 15200 system Software Configurable ProtectionPage Bus Configuration ONS 15200 Network ConfigurationsLogical Connections Ring ConfigurationMultichannel Point-to-Point Configuration Dual-Home ConfigurationRing Configuration with Hubbed and Meshed Traffic Ring configuration with hubbed and meshed traffic Full-Mesh ConfigurationNetwork Protection Four ONS 15252 MCUs in a full-mesh configurationONS 15252 MCU Modularity and Ancillary EquipmentClip ONS 15201 SCU Status Cause Power Distribution PanelFan Unit Fiber Organizer ONS 15252 MCU Physical ConfigurationPhysical Layout Configuration of the ONS 15252 Multichannel Unit Internal BUS Clip NAM Clip NCB HFM ONS 15201 SCU Physical ConfigurationPhysical layout of the ONS 15201 SCU Power and GroundingONS ONS 15252 MCU Power and GroundingElectromagnetic Compatibility Safety SpecificationsEnvironmental Compliance Channel Number Frequency THz Wavelength nm Product SafetyWavelength Grid Page Network Management Overview Network ControlCisco ONS 15200 Product Description 78-13766-01 Hardware Platforms EIA/TIA-232 RS-232 InterfaceSpeed Kbps Data Bits Parity None Stop Bits Flow Control Parameter ValueEthernet interface Command Line InterfaceMA interface Maintenance ManagerInternal Data Bus Web-Based InterfaceONS 15252 MCU internal data bus extension ports Cisco Transport Manager AlarmsSimple Network Management Protocol Interface Condition Name Definition Alarm NameAlarm Name Definition Page Client Layer Interface Port Module OverviewCommunication Interface Module Equipment Version CLIPs Restriction TemperatureONS MaximumStatus Network Adaptation ModuleNetwork Control Board Module Collector Filter Module Bridge ModuleConnection Module Connection Module YTermination Module Hub Filter ModuleLine Module Page Parameter Condition Maximum OperationalOptical Performance OpticalOptical Frequencies Parameter Condition Minimum UnitOptical Loss Includes Connectors Equipment Maximum dBEquipment Maximum dB Includes15201 SCU unprotected optical path 100/0 or 0/100 Parameter Condition Min Max Unit EnvironmentalParameter Units MechanicalParameter Max Unit ElectricalAcronyms Control area network Electronic Industries Association International Electrotechnical Commission Internet protocol National Fire Protection Association Subnetwork Manager D E IN-2 IN-3 IN-4
Top Page Image Contents