Cisco Systems ONS 15200 manual Condition Name Definition, Alarm Name

Chapter 4 Operation, Administration, and Maintenance

Alarms

Table 4-2 Environment Parameter Definitions for Protected Channels

Condition Name		Definition
DWDM_RXPOWER		The power input from the A-side of the ONS 15200 network is
(unprotected only)		outside the acceptable power range.
DWDM_ARXPOWER		The power input from the A-side of the ONS 15200 network is
		outside the acceptable power range.
DWDM_BRXPOWER		The power input from the B-side of the ONS 15200 network is
		outside the acceptable power range.
DWDM_PELTIERCURRENT		The Peltier current of the selected CLIP module is outside the
		acceptable power range.
DWDM_LASERTEMP		The temperature of the laser transmitting to the ONS 15200 network
		is outside the acceptable temperature range.
CLIENT_RXPOWER		The power input from the client equipment is outside the acceptable
		power range.
CLIENT_LASERTEMP		The temperature of the laser transmitting to the client equipment is
		outside the acceptable temperature range.
ENVIRON_BOARDTEMP		The temperature on the surface of the CLIP module circuit board is
		outside the acceptable temperature range.
Table 4-3 Alarm Status Parameters
Alarm Name	Definition
QPP (unprotected	Proprietary protocol error on the A-side of the network
only)
QPPA	Proprietary protocol error on the A-side of the network
QPPB	Proprietary protocol error on the B-side of the network
CAN	Error on the CAN bus
POWER1	PS-1 input is outside of the acceptable range
POWER2	PS-2 input is outside of the acceptable range
FDI	Loss of channel
Miscellaneous alarms
DAC	D/A converter alarm
FLASH	EEPROM alarm
INSTRUCTION	Software attempted to write to an invalid location (autoclears
	after two seconds)
STATUS	Alarm indicator

Cisco ONS 15200 Product Description

4-10 78-13766-01