Cisco Systems ONS 15200 manual Network Adaptation Module, Network Control Board Module, Status

Page 53

Chapter 5 Module Descriptions

Network Adaptation Module

5.4 Network Adaptation Module

The NAM splits the outgoing optical signal from the CLIP module (one of the DWDM wavelengths or channels) before transferring it to the passive optical shelf (located in the lower part of the ONS 15252 MCU). The NAM split ratio can be 100/0, 90/10, 50/50, 10/90, or 0/100. Unprotected channels use the split ratios 100/0 and 0/100. Protected channels use the split ratios 90/10, 50/50, and 10/90.

The NAM transfers the signal to the passive optical shelf in the following patterns:

•A side or B side (unprotected channel)

•A side and B side (protected channel)

The HFMs collect the incoming optical signals from the DWDM side of the ONS 15200 system and transfer the outgoing signals to the DWDM side of the ONS 15200 system. The NAMs then transfer these incoming/outgoing optical signals to/from the CLIP modules.

5.5 Network Control Board Module

The NCB module is the hardware platform for the Subnetwork Manager (SNM) software package, which you access using the Ethernet connector on the front of the NCB module. The NCB supervises, administers, and monitors the ONS 15200. In addition to controlling all of the ONS 15200 system CLIP modules, the NCB module collects information about system status, alarms, parameters, and actions on the internal data bus. You can also store performance monitoring data on the NCB and upload the data to external media.

Release 1.1 supports multiple NCBs on the CAN bus; however, you can only configure two active NCBs as managers of any CLIP in a network. Any NCB in a network that is not provisioned as an active manager of a CLIP can still inventory the CLIP. Release 1.0.1 only supports one NCB on the CAN bus.

In addition to alarm lines on the internal data bus, the NCB has three dedicated LEDs. When lit, the LEDs indicate the status shown in Table 5-2.

Table 5-2 NCB Indicators

LED

Red

Amber

Green

Status

Critical or major alarm

Minor alarm or warning

Power on

The ONS 15200 system can function without the NCB module. When you choose not to use an NCB module, mount a front cover in its place for EMC/EMI precautions. The front cover used in place of the NCB module is narrower than the front cover used in place of the CLIP module. Do not interchange the two types of front covers.

Cisco ONS 15200 Product Description

 

78-13766-01

5-3

 

 

 

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Corporate Headquarters Cisco ONS 15200 Product DescriptionCisco ONS 15200 Product Description N T E N T S Alarms Acronyms A-1 Contents Cisco ONS 15200 Product Description 78-13766-01 G U R E S Viii NCB Indicators Tables Cisco ONS 15200 Product Description 78-13766-01 Related Documentation Manual StructureWorld Wide Web Relevant StandardsObtaining Documentation Ordering Documentation Optical Networking Product Documentation CD-ROMDocumentation Feedback Obtaining Technical AssistanceTechnical Assistance Center Cisco.comCisco TAC Escalation Center Xvi Unprotected Channels Optical System DescriptionOptical Channels Unprotected channels in an ONS 15200 system Protected ChannelsOptically-fiber protected channels in an ONS 15200 system Software Configurable ProtectionPage Bus Configuration ONS 15200 Network ConfigurationsLogical Connections Ring ConfigurationMultichannel Point-to-Point Configuration Dual-Home ConfigurationRing Configuration with Hubbed and Meshed Traffic Ring configuration with hubbed and meshed traffic Full-Mesh ConfigurationNetwork Protection Four ONS 15252 MCUs in a full-mesh configurationONS 15252 MCU Modularity and Ancillary EquipmentClip ONS 15201 SCU Status Cause Power Distribution PanelFan Unit Fiber Organizer ONS 15252 MCU Physical ConfigurationPhysical Layout Configuration of the ONS 15252 Multichannel Unit Internal BUS Clip NAM Clip NCB HFM ONS 15201 SCU Physical ConfigurationPhysical layout of the ONS 15201 SCU Power and GroundingONS ONS 15252 MCU Power and GroundingElectromagnetic Compatibility Safety SpecificationsEnvironmental Compliance Channel Number Frequency THz Wavelength nm Product SafetyWavelength Grid Page Network Management Overview Network ControlCisco ONS 15200 Product Description 78-13766-01 Hardware Platforms EIA/TIA-232 RS-232 InterfaceSpeed Kbps Data Bits Parity None Stop Bits Flow Control Parameter ValueEthernet interface Command Line InterfaceMA interface Maintenance ManagerInternal Data Bus Web-Based InterfaceONS 15252 MCU internal data bus extension ports Cisco Transport Manager AlarmsSimple Network Management Protocol Interface Condition Name Definition Alarm NameAlarm Name Definition Page Client Layer Interface Port Module OverviewCommunication Interface Module Equipment Version CLIPs Restriction TemperatureONS MaximumStatus Network Adaptation ModuleNetwork Control Board Module Collector Filter Module Bridge ModuleConnection Module Connection Module YTermination Module Hub Filter ModuleLine Module Page Parameter Condition Maximum OperationalOptical Performance OpticalOptical Frequencies Parameter Condition Minimum UnitOptical Loss Includes Connectors Equipment Maximum dBEquipment Maximum dB Includes15201 SCU unprotected optical path 100/0 or 0/100 Parameter Condition Min Max Unit EnvironmentalParameter Units MechanicalParameter Max Unit ElectricalAcronyms Control area network Electronic Industries Association International Electrotechnical Commission Internet protocol National Fire Protection Association Subnetwork Manager D E IN-2 IN-3 IN-4
Top Page Image Contents